Guitar making, David Antony Reid bending 3 piece guitar ribs,
Loading...
Loading...
5:15
O'Brien Guitars- Luthier Tips du Jour - Bending Bindingsby OBrienGuitars20,590 views- 3:40
Guitar-making, David Antony Reid dovetail neck fitting part 2by darluthier656 views
- 7:37
Guitar making, David Antony Reid purfling fitting part 2by darluthier395 views
- 4:18
Guitar-Making, David Antony Reid Stringing up Setting up! Part 2by darluthier173 views
- 3:44
Guitar making, David Antony Reid purfing fitting part 1by darluthier319 views
- 8:43
Blues Creek Guitars - Bending and Setting Up Sides Part 3by glasalle5,840 views
- 3:10
50kph on a bodyboard!by kevsurf200354,348 views
- 4:42
Mike Dodd of 'Peter Green And Friends' playing a David Antony Reid VaultBack.by darluthier667 views
- 10:52
Parlour Guitar: design & construction III. Bending the sides.by NavaGuitars1,840 views
- 4:29
Bending the ribs ....by BLviolin10,468 views
- 1:29
David Antony Reid Guitar with Bevel at Guitar Gallery.dvby guitargal77822 views
- 2:10
NK Forster Guitars Bending sides 2 Luthierby Nkforster12,926 views
- 1:17
DADGAD tuning with Ian Stephenson, and NK Forster Guitarsby Nkforster4,336 views
- 9:59
Guitar-making David Antony Reid Set-up Stringing up part 4.by darluthier311 views
- 14:56
David Antony Reid, guitar making, new VaultBack for Montreal, rib thicknessing.m4vby darluthier190 views
- 9:41
Charis Side Bends Part 1by charisguitars1,800 views
- 5:03
Luthier Tips du Jour - Heating Blanket Temperature Controllerby OBrienGuitars6,809 views
- 3:40
The Giant Guitar - Portugalby journeymanpictures2,855,747 views
- 9:23
LUTHIER SERIES bending sides (guitar)by edsonvalencio10,521 views
- 5:49
VID 2 - Building an Acoustic Guitar - Bending the Sidesby htguitars2,838 views
Any tips on hand bending Padauk? Does it need to be soaked or moistened? I've heard it turns purple when ready to bend. Thanks
derfilmmacher 9 months ago
@derfilmmacher I bend pretty much everything dry, so I get fewer problems like discolouration; but if something is really figured, - like fiddle-back maple - then I might give it a light spray with water. Paduk is great, no problems at all! You'll always get a little discolouration of some-sort when bending anything, dry or wet; but as long as it's not from a deep burn because your iron is too hot for too long, then it'll cut back fine. Hope that helps!?
darluthier 9 months ago