Airsoft GI - Beta Project P-Mag Service Bulletin Quick Fix
Loading...
Link to this comment:
Top Comments
All Comments (147)
-
@Gday811 i just did it
-
@hobojoeisme matrix bbs and/or airsplat bbs are good consistently
-
alot of help thank you gi
-
This actually doesn't work, as the cap is GLUED in. Hit the side all you want, it wont do shit. For those of you who don't want to drill holes on the cap, follow this brief solution at your own risk.
- Put the corner of the cap under hot water for a minute, just to loosen the glue. Then try to pry the cap out with a knife by sticking it on the side of the cap and pushing up. Repeating this a few times, for me, got it open. Hope it helped.
-
THANK YOU THANK YOU THANK YOU! But there's one more problem. On one of mine I can't push the spring back through it, and so far I haven't found a way to push out a BB that I think is in the curving part of the spring guide. Help?
-
+1! Had 3 pmags jammed and this saved me $30 bucks in replacement costs. Ty much!
-
@TheMadman1144 Also if you tape the swivel part of the follower the mag will never jam.
-
Check out my channel for a much better video ,I promise you I'll unjam your mags
-
3/5 of mine jammed after one battle
3:13
Airsoft GI - KWA LM4 PTR and PTS Gas Blowback M4 Airsoft Guns - Professional Training Rifleby AIRSOFTGIdotcom34,926 views- 7:37
Airsoft GI - Bob "The Axe man" Hildebrand's KWA KMP9 Custom Build.by AIRSOFTGIdotcom26,384 views
- 3:24
Airsoft GI - BLACKHAWK! SERPA Holster for 1911/M9/Glock/ATP Overviewby AIRSOFTGIdotcom12,297 views
- 4:42
Airsoft GI - Echo 1 Lone Wolf Timberwolf Gas Blowback Pistolby AIRSOFTGIdotcom30,348 views
- 4:02
Airsoft GI - KJW Mark II Gas Repeating Airsoft Rifleby AIRSOFTGIdotcom14,958 views
- 1:58
Airsoft GI - SHOT SHOW 2012 KWA KRISS Gas Blowback SMG Previewby AIRSOFTGIdotcom66,623 views
- 5:02
Airsoft GI - Tactical Gearheads - Clint's Updated Rigby AIRSOFTGIdotcom26,993 views
- 1:49
Airsoft GI - Get out of Your Command Center and Play some Airsoft!by AIRSOFTGIdotcom47,225 views
- 6:30
Airsoft GI - Tactical Gear Head John "The Man" Wang's Ultimate Chairsofting Rigby AIRSOFTGIdotcom16,791 views
- 1:29
Airsoft GI - KWA KRISS KWIK Look - Gas Blowback Sub Machine Airsoft Gunby AIRSOFTGIdotcom41,570 views
- 10:41
Airsoft GI - Magpul MOE Carbines Let's Take a Quick Look at Themby AIRSOFTGIdotcom42,257 views
- 10:33
Airsoft GI - Tim vs Bob Battle for Viper Game Scenario 1by AIRSOFTGIdotcom35,509 views
- 5:42
Airsoft GI - Beta Project Tactical AK Airsoft Gunby AIRSOFTGIdotcom24,682 views
- 8:14
Airsoft GI - What Else Is There? Airsoft Style STANAG Mag Editionby AIRSOFTGIdotcom144,686 views
- 0:37
Airsoft GI - WTF is Bob Doing? Don't ever put BBs that have fallen on the ground in your gun!by AIRSOFTGIdotcom29,310 views
- 6:03
Airsoft GI - What Else Is There? - Elite Force - D Boy - JG - ICS - Mid Range M4by AIRSOFTGIdotcom25,016 views
- 3:45
Airsoft GI - Practical Joke on Bob - Season To Remember Promo for Retail Storeby AIRSOFTGIdotcom21,715 views
- 2:09
eHobbyAsia.com - Beta Project M4 MOE Mid-Length EBBby eHobbyAsiaChannel3,125 views
- 8:50
Review of the Beta Project Magpul PTS GBB Magsby afireinsidepjg1,094 views
- 1:37
eHobbyAsia.com - Magpul PTS X Beta Project Tactical AK AEGby eHobbyAsiaChannel13,747 views
We want more of Frank!Airsoft Tec Tips with Frank or so !!
Kelric78 2 months ago 22
4 out of 10 mags had problems, my fix:
1) use quality BB
2) i removed the follower, only the spring remained, yeah it will work fine, even on crap BB then
The cap where it says 80 rounds it glued so it wont come off easy or at all. Then you have to remove the base plate and carefully open them in half with a knife and at the end glue them back together
I did the pop-open fix out in the field long time ago until i got tired and removed the follower, best and final solution
Hope this helps
TheMadman1144 1 month ago 15