Connecting Wood Beams
Uploader Comments (AsktheBuilder)
All Comments (10)
-
Correct!!!
-
@garthqueen "They are known as carriage bolts here in the UK"
That is true. That said, Askthebuilder's videos are too useful to risk upsetting the lad. As far as I am concerned he can call them Minny Mouse's dido if that makes him happy. I am currently renovating a property and Tim's advice has been invaluable. Apart from everything else, he is so bloody cheerful.
-
hahahahah @ :54 I just love it when size comparison can be measured by arms length.
-
They are known as carriage bolts here in the UK.They have a square collar just under the head to grip the wood so you can put the nut on without the bolt turning in the hole as you tighten it.
-
GREAT vid Tim. Thanks
-
A good tip if you have to hammer threaded rod into the hole is to thread the nut (and washers) on the end you hammer first - if you damage the start thread with the hammer it will be very hard to get the nut on the rod. Just make sure you wind it a few turns past the end of the rod so you are not using the hammer on the nut, but on the rod.
Cheers
-
Tim you know you're stuff!
-
Thanks for the tips I've added a lot of your handy tips videos to our Australian Group for property investors.
That is a carraige bolt. A thru bolt has a hex head on either end.
emutiny 4 years ago
That's not true. They are called hex-head bolts. The term through-bolt refers to a fastener that passes completely through the pieces of wood as opposed to a lag bolt fastener. Thanks for your comment!
AsktheBuilder 4 years ago