mv8000 3.5 uprade and vga pinout instructions

MV8000 LCD/MOUSE PINOUT INSTRUCTIONS




VGA CHART name cable color




1- red signal cable (thick) - red / *pink




2-green signal cable (thick) - green / *grey




3-blue signal cable (thick) - *blue




4- id monitor 2 / ground - sheild / (sometimes black)




5- digital ground gnd - *exposed sheild (sometimes green)




6- red rtn gnd - *exposed sheild (sometimes red)




7- green return gnd - *exposed sheild (sometimes green)




8- blue return gnd - *exposed sheild (sometimes blue)




9- no pin/key/+ 5v dc - no pin (you are not using this connection)




10- ground with sheilding - black (somtimes red / *orange)




11- id bit 0 - (you are not using this connection)




12- id bit 1/data - *white




13- horizantal sync - *brown




14- vertical sync - *yellow

15- id bit/clock - *green




MOUSE CHART - (intellimouse 1.3a ps/2 only - your mouse wiring may be different) orange - data - 1 white - +5v dc - 4 yellow - clock - 5
blue - ground - 3

#2 and #6 are not needed/not used

CONNECTION - STEPS

RED IS CN1 -- LEFT TO RIGHT

there are 16 connections use red wire as your starting point inside the mv8000 and go left to right counting each wire
then follow the chart above for your connections , this diagram is is for cut wires and exposed wiring




step 1 -- #1 red connect to #4 (+ 5 volts) mouse
step 2 -- #2 white connect to #6 (nothing) mouse
step 3 -- #3 white connect to #2 (nothing) mouse
step 4 -- #4 white connect to #5 (clock) mouse
step 5 -- #5 white connect to #1 (data) mouse
step 6 -- #6 white connect to #3 (ground- mouse) & #12 vga ground
step 7 -- #7 , #11 , #13 connect to vga #5 (ground)
step 8 -- #8 white connect to #15 vga (monitor id)
step 9 -- #9 white connect to #13 vga (horizontal sync)
step 10 -- #10 white connect to #14 vga (vertical sync)
step 11 -- #12 white connect to #1 vga red/pink thick wire(video)
step 12 -- #14 white connect to #2 vga green/grey thick wire(video)
step 13 -- #15 grey connect to vga #10 (sync ground)
step 14 -- #16 white connect to #3 vga blue thick wire(video)

note- 1--connect wires #7, #11,#13 together then connect them to #5 vga exposed sheild ground(you just need a ground) connect mv #6 white to mouse #3 ground and to vga #12




note- 2--if you have monitor problems (not showing) then connect #6 white,#3 mouse,#12 vga,#10 vga,#15 (grey) and make 1 full ground connection




note- 3 --all exposed non sheiled grounds on vga can be tied together




your are now connected ---

press shift exit on your mv8000 to activate the monitor
make sure your mouse is working first
you will see the monitor connected icon in the corner of yor mv screen

Category:

Music

Tags:

• mv8000 vga pinout
• mv 8000 vga
• vga

[sonnicheeba]

no its not misnamed -- click the "show more" link^^^ above , its full detail specs .. all you need is a ohms tester to test your pinouts to locate each "colored wire" to its proper pinout...you only use 4 wires on your mouse (for those who dont know)

[sonnicheeba]

no its not misnamed -- click the show more link , its full deta specs .. all you need is a ohms tester to test your pinouts to locate each "colored wire" to its proper pinout...

[sonnicheeba]

NO ONE NEEDS TO PAY ME ANYTHING -- I WILL HELP ANYONE FOR FREE -- MY INFO IS POSTED ON MVNATION ALSO -- FUCK MVNATION FOR TELLING PEOPLE I HAVE NO NAME , NO LEGIT BUSINESS , AND A GMAIL ADDRESS -- THE INFO IS FREE NITRED , AND I HAVE DONE 25 + MODS SO FAR WITH NO PROBLEMS AND NO THERE NOT FROM MVNATION FORUMS -- MVNATION IS NOT A STORE OR A REPAIR SHOP AND I HAVE NOT DONE ANY BUSINESS WITH ANY ONE THERE -- MVNATION IS A BUNCH OF FAKE BEAT MAKERS WHO JUST SIT AT HOME BEATTING THERE MEAT

[boomtomb]

are these your specs?

[sonnicheeba]

@boomtomb yes these are my specs -- some specs and ideas are taken from mv8killa and nzclint 

[303fixinpcs]

Does the drum grid display properly with this mod?

[jbartl87]

Sorry, but exactly where in this video are you giving vga pinout instructions? I think your video is misnamed.

[sonnicheeba]

@MVtutorials those guys didnt feed you anything that you could have read in the manual -- funny how they were so jealous of the mod , they banned me then reposted my specs and instructions ... but yet cant explain how its done and everyday i get 10-15 emails from people asking for help...

[dougdenada66]

@sonnicheeba Can you put up the pics please. I don't get it yet.

[blackheadbeats]

hey man i just got the asq10 and im having trouble linking my mv8000 up to the asq10 could you please let me know what im doing wrong

[TheReggiereg1]

do you sell these

[MVtutorials]

@sonnicheeba I asked about this and got the following response from the mod.

NZclint was not/is not banned. Mv8killa was banned for spamming and using multiple accounts in his own threads to sell the pinout on eBay. you shouldn't bash an entire thread because a beef with a mod. Those guys feed me info all the time and it's been pretty cool.

Did you solve the problem with the Drum Grid being completely on the screen? or is a monitor quirk?