91 FZR600 w/ 05 R6 tail, and 2000 R6 tank

List of mods done to this with a short description of what's involved is below...and if you've watched my other videos, i've sold my jetted carbs and bought YZF ones(stock jets are larger than FZR jetted ones), and sold my CBR tail conversion with the brackets. So now I have the below mods done to it that and a couple more that are in the works...as far as upgrading the tank again, i'm not sure if I want to or not. Don't know which one will look better, YZF600 or stay with R6.

Mods:
-05 R6 tail/seats (welding required)
-00 R6 tank (welding required)
-ebay LED turn signals (plug and play)
-custom fender eliminator (old bed frame required..lol)
-YZF600 carbs (not as simple as just slapping them in, modding experience is required to do this)
-YZF600 switches (not mentioned in the video, but look closely, they are there, switch rewire and new turn sig relay required necessary)
-YZF600 clutch cover/cable (plug and play..that simple)
-YZF600 starter gear cover aka peanut aka front right cover (plug and play, oil drain required)
-YZF600 blue dot calipers/lines/brake lever/reservoir (plug and play, it's that simple too)

in the works:
-YZF600 swingarm/tire/sprockets/chain/rear brake assy (pretty simple, some grinding required)
-YZF600 tank (possibly) (really simple too, some modding experience required)

Category:

Autos & Vehicles

Tags:

• FZR
• FZR600
• YZF600
• YZF600R
• thundercat
• modding
• mod
• custom
• customizing
• fzronline.com
• pods
• individual
• k&n
• r6
• conversion
• convert
• LED
• turnsignals
• turn
• signals
• turns
• signal
• yosh
• yoshimura
• motorcycle
• 89
• 90
• 91
• 92
• 93
• 94
• 95
• 96
• 97
• 98
• 99
• match417

[DarKRid3R21]

man, looks good I say. I have a question: I have a Yamaha R6 from 2000. How do you think would look with a tank from a R6 2006 and a tail from yamha r6 2006? or .. combined tail from 2005 and fairing from 2005.. or fairing (bodywork) from 2006 full, on R6-2000 .. what do you think ?

[match417]

@DarKRid3R21

I have newer videos of the bike in a different color scheme. As far as your bike, it's carbureted with a 3 - 5 psi fuel pump and only one fuel line. The 2006 R6 is fuel injected with two fuel lines and a very high PSI fuel pump. You will need to make some sort of a block off plate to cover the tank hole where the 06 fuel pump is and make the plate where you can bolt in a petcock from something else and attach your 2000 R6 fuel pump to it. The 2006 fuel pump will flood your carbs.

[DarKRid3R21]

@match417 oh, ok. but .. if a put the tail and the fairings from '06 with my 2000 tank ? how it looks?

[match417]

@DarKRid3R21

hard to say, it might look good. Might look odd.

[dillon123345]

you wouldnt happen to have any pics or be able to make a vid on how you modded the subframe im doing the same conversion any help would very helpful

[match417]

@dillon123345

if you go to my main page then I have another video uploaded that shows my subframe and tank brackets. I walk through the basics of what has to be done.

[brock1384]

Very good job man. You answered a burning question I've been seeking a answer for! Keep up the good work!

[DarKRid3R21]

i have a picture with a r6 from 2000 with a fairings from '06! .. if you want to see

[NateDaGreat92]

Bedframe eliminator FTW!!

[turrock]

Your videos inspired me to do a 2007 R6 full fairing conversion! Check out my video. Doing blue dot conv and possibly an early model.r6 tank on (not a yzf one)

1997 fzr looks 10 years newer!