Home Made CNC 1
Loading...
Loading...
1:12
CNC Router cutting the Wood Dragon mad fron Harding wood from Thailand.by Theppuen488,629 views- 1:14
Milling PCB on home-made CNCby YO8RZE68,357 views
- 0:54
Home made CNC for 50 €by lacoustetej619,373 views
- 0:41
Home Made CNC Router From Saudi Arabia Part07by fmr4cnc8,554 views
- 0:52
My homemade cnc machine V3.0by Jetijs89,502 views
- 0:19
The start of a home made cnc tableby picaxester21,290 views
- 1:32
Homemade CNC Router (building Y axis)by cagea8036,301 views
- 0:24
CNC Homebuilt 1 VOJTEKby Sysring55157,933 views
- 2:24
CNC KIT 10.12 - THE BEST CNC KIT FROM WORLD.mpgby ardischi24,523 views
- 3:29
Home Built CNC Hobby Routerby trav36396,834 views
- 2:45
Hobby CNC Machineby gpm4985341,626 views
- 10:00
Homemade DIY CNC Mill Upgrade Part 2 - Neo7CNC.comby radioshack717,262 views
- 0:57
Homemade CNC Router Moving at full cutting speedby blackwoodsoffroad47,762 views
- 2:59
Wood engraving using homemade CNCby suchipo184,147 views
- 0:37
MY HOME MADE CNC 7032 CUTTING ALUMINUM 2(6061-T651 )by scripitsky4,229 views
- 2:35
CNC Controller Home madeby astromax80120,676 views
- 1:16
Home made CNC 004by JRAMONSG3,227 views
- 0:36
cnc home madeby danicalliope19764,487 views
- 1:34
4X4 Routerby hdpositive75,245 views
Hi my name is andrew. i really like your build here. i was woundering if you could send me some plans to build this for a cnc plasma cutter. it would work great cause of the open bottom for metal to set in. and if you could get me some plans i could give you mini chopper plans in exchange.. i bought them on the net. and also i can give you some easy to make tub bender plans in return and thanks.
andrewstunna08 1 year ago
All that unsupported weight will make for very rough results. You are asking for crabbing problems by driving with 2 motors, much better 1 motor and a belt drive to the other side. If 1 motor loses steps the gantry will be out of square and your part (and mabe the machine) wrecked. Even better would have been rack and pinion on your long axis and drive both sides from one motor.
Dont want to bring you down but I made these mistakes myself.
Well done for having a go anyway :-)
Smiler12008 1 year ago
Very nice!
It runs very smoothly too.
I see that you have a motor at each end of the gantry. This will make for a very strong machine. Well done :) .
DonkeyHaven 2 years ago