Homemade Tool Holders

I had to make some holders for my pliers and channel locks. I could not find any good ones for the peg board. An easy project that can help organize your work area.

Category:

Entertainment

Tags:

• vee
• homemade
• tool
• holders
• peg
• board
• tools
• workshop

[smokyman9]

thats realy nice>

thanks alot>

[anestis1971]

@smokyman9 Thanks. Thanks for watching and commenting

[macdoro999]

You should have used a piece of pegboard as a template when laying out your mounting plate, then used the same template to drill the holes in the conduit. Everything would then have the same spacing and the holders would mount uniformly.

[anestis1971]

@macdoro999 Templates are good to use. I wasn't to worried at the time. Good suggestion. Thanks for watching.

[dougspair]

I'm 64, am still finding new things to learn Thanks!

[anestis1971]

@dougspair Thanks for watching and commenting. Glad you liked it.

[turningandknives]

just made two of hem one from one inch copper pipe and the other is like 1 inch pipe to quater inch

[VoxPandemonium]

Good idea. Thanks for sharing this.

[KlaasStortebeker]

Nice tips and tools. Your next investment should be a decent camera, though.

Cheers

[massey35x1]

great idea

must try

[AlteredEagle]

Cheapper than buying the "secial" peg board stuff. A trick I use for drilling on a rounded surface, is. Scrap 2x4 or what ever, Drill a hole in the face, that will fit the work piece (tube) then drill a hole "crossbore" through edge, into the larger hole.

Also if doing many like you did. take your long pipe measure the 2" cut off points and the screw holes. Do your drilling first on larger pieces then chop of each one.

Nice Idea!!! just trying to make it easier to make.