How to use Console Customs Xbox 360 Rapid Fire user Programmable Mode

This video shows how to use the programmable mode of our Xbox 360 rapid fire controllers. Text directions are below as well.
1.You first need to be in the user adjustable game mode. Use the procedure described on the previous page to switch the controller to the correct mode.
2.Once in the user adjustable game mode. You will need to first hold in the trigger and while holding the trigger press and hold the mode change button on the back. (or sync button for stealth controllers). You must hold in the trigger first, before pressing and holding the button. If you do not follow this order you will just switch the game mode instead of entering to programming mode.
3.Hold both the trigger and the button for aprox 3 seconds. After 3 seconds you will see the player 4 LED come on for 1 second then go out. After you see this you can release both the trigger and the button. You are now in the programming mode.
4.When you enter the programming mode the user programmable speed is set back to 6 shots per second (166 milliseconds per sot). This is so you always know where you are at and also allows the programming to be done with only using one button.
5.While in the programming mode every time you press the button on the back of the controller (sync button on stealth controllers) the firing rate will increase by 2ms. The player 4 LED will also flash. The rate can be increased until you reach 25 shots per second ( 40 milliseconds per shot). At this point the player 4 led will not flash and pushing the button will no longer increase the speed.
6.At any time you can test you speed by just pulling the trigger.
7.Once you are at the desired speed follow steps 2 and 3 above to return to the user adjustable game mode.

Tips:
•Every time you enter the programming mode the speed is set back to 6 shots per second (166 milliseconds per sot)
•Remember or better yet write down the number of times you pressed the button. So you can go back and make adjustments if needed.
•This mode works in milliseconds each time you press the button the speed is decreased by 2ms. So you can easily calculate you speed.
•The default is 6 shots per second or 166ms. There are 1000 milliseconds in 1 second. So 1000/166 = 6.02 or approximately 6 shots per second.
•If you press the button 20 times you are now at 126ms. 1000/126 = 7.94 approximately 8 shots per second.
•If you want to go slower in speed you must exit and re-enter the programming mode and start over.

Category:

Gaming

Tags:

• xbox
• 360
• rapid
• fire
• button
• stealth
• rfx-9
• rfx-11
• 3-mode
• turbo
• ps3
• playstation
• call
• of
• duty
• world
• at
• war
• gears
• halo
• rainbow
• vegas
• ghost
• recon
• advanced
• fighter
• grand
• theft
• auto
• iv
• gta
• mod
• modded
• kit
• controller
• wireless
• wired
• june
• 11th
• patch
• September
• 3rd
• user
• programmable
• adjustable
• mode
• modern
• warfare
• console
• customs
• compatible
• RFX-3
• RFX-5
• RFX-5D
• RFX-5X
• 5-mode
• patched
• update