1. 17/64in x 7in 280# DR - Reverse 1in Suede cert

  2. 9/32in x 7in 350# DR - DU 1in Suede cert

  3. 17/64in x 7in 280# DR - Ostlund DU cert

  4. L x 7in 355# DR - DU IMP cert

  5. 17/64in x 7in 275# DR - Terminator Reverse IMP cert

  6. Speed Card Tearing (horizontal & vertical) & CoC #3 with 1in block

  7. DU-IMP - L x 7in - 370# DR - cert attempt bend

  8. mailman

  9. HOSS #2.5 Certification

  10. 3-16in x 7in DR 100# Barehand Bend

  11. 1-4in x 6in Black Grade 8 DO IMP Bend

  12. 9-32in x 7in Drillrod 350# DU IMP Bend

  13. FBBC 1-4in x 5in Grade 5 Bolt - DU Bend

  14. FBBC Bastard - DO Bend

  15. 500# Drillrod 6in x 9-32in - DU Bend

  16. H x 6in 360# Drillrod - DU in IMPs

  17. 14.79mm x 24in HRS Braced Bend

  18. 7.24mm x 7in CRS - Reverse Bend with IMPs touching

  19. FBBC 3-8in x 12in Spike Bend

  20. 14.87mm x 29in HRS Braced Bend

  21. 7.24mm x 7in CRS in IMPs (touching) - Reverse bend

  22. FBBC 1-4in x 6in Square CRS - DU

  23. Red Nail - 3rd attempt

  24. Rear Hammer hold

  25. 390# 7in Drillrod DO bend

  26. FBBC 1-4in x 7in Square CRS DU bend

  27. DO bend - 470# Drillrod 7mm x 6in in 1in wraps - failed

  28. 285# Drillrod - Terminator Reverse bend

  29. 260# Drillrod - Ostlund Style bend

  30. 1-4in x 5in Grade 5 (dark) - DO Bend

  31. FBBC 1-4in x 6.5in Square CRS - Reverse Bend

  32. DO Bend - 370# Drillrod

  33. DU Bend - 285# Drillrod - IM wraps

  34. CoC #2.5 CCS

  35. 5-16in x 7in HRS Reverse bend in IM wraps

  36. 5-16in x 8in HRS Reverse bend in IM wraps

  37. Reverse bend - FBBC 1-4in x 6in CRS in single IM wrap

  38. Reverse bend - FBBC 1/4in x 7in CRS in single IM wrap

  39. 1-4in x 6in Grade 5 in IM pads (wraps touching).wmv

  40. MM0 attempts (14May2010)

  41. 1-4in x 6in Grade 2 Bolt - Heslep style bend

  42. 8.7mm x 7in HRS

  43. 5-16in x 6in Grade 2 Bolt

  44. 8.2mm x 7in Carriage Bolt

  45. FBBC 1-4" x 5in Square CRS & Reverse 6" Grade 8 failures

  46. 1-4in x 5.5in Grade 5 Bolt - DO in IM wraps

  47. 7mm x 15cm Stainless

  48. FBBC SCF Ultra-Lite #2 Horseshoe Bend

  49. FBBC 1/4" x 7" Square CRS - Reverse

  50. Tearing a deck of cards in the box

  51. CoC #2.5 Coin Hold, Right 16sec

  52. Red Nail (2nd try) & 1/4" x 5" Square...failed

  53. FBBC 1/4" x 5" Grade 5 Bolt - DO

  54. FBBC 1/4" x 5.5" Grade 5 Bolt - DU

  55. FBBC 1/4" x 5.5" Grade 5 Bolt - Reverse Style

  56. FBBC 1-4in x 5.5in Square CRS - DO

  57. FBBC 1-4in x 6in Grade 5 Bolt - DU

  58. FBBC 1-4in x 5.5in Grade 5 Bolt - Reverse

  59. Card Tearing - Longways & 80 cards

  60. FBBC 1-4in x 6in Grade 5 Bolt - Reverse Bend

  61. 7mm x 15cm CRS - DU

  62. Red Nail (1st attempt)

  63. Tearing a deck of cards - halved & quartered

  64. FBBC 1/4" x 5.5" Grade 8 Bolt

  65. FBBC 1/4" x 5.5" Square CRS (almost)

  66. 7mm x 15cm stainless steel (failed bend)

  67. Card Tearing

  68. FBBC 1/4" x 6" Grade 8 Bolt (DO)

  69. FBBC 1/4" x 6" Square - DO Bend

  70. CoC #3 MMS attempts

  71. CoC #2.5 CCS-TNS attempts

  72. FBBC 1/4" x 5.5" Grade 5 Bolt - DO Bend

  73. FBBC 1/4" x 6.5" Square - DO Bend

  74. FBBC 1/4" x 6" Grade 5 Bolt - DO Bend

  75. FBBC 1/4" x 7" Square - DO Bend

  76. 9mm x 6.5" HRS - Reverse Style

  77. 9mm x 7" HRS

  78. 60d IEW

  79. Gripper Setting Technique - Part 2 of 2

  80. Gripper Setting Technique - Part 1 of 2