1995 Oldsmobile Cutlass Ciera Brake and Rotor Repair
Loading...
5,121
Loading...
Uploader Comments (APDTY)
see all
All Comments (9)
-
@billyphx2001 was thinking the exact same thing while I was watching
-
I'm having to do this for my sister, and her car is a '93, but the brake system looks pretty much identical. Thanks for the vid!
-
I had to replace the brake pads and rotors on a 1996 Ciera and this helped a lot. In my case it was very difficult to remove the calipers, but it was easy once I got them off. The old pads were so thin, they dug down into the driver side rotor and scratched the passenger side rotor. Thanks for this video. I wouldn't have been able to do it if I had not seen this.
-
is the rear brake pads,rotors,calipers hard to replace
-
thank you =D
this makes it easy, i have a 93
Loading...
U should always take the cap of the master cylinder before compressing calipers to reduce ABS system damage...
billyphx2001 7 months ago
@billyphx2001 You are correct, and if I did not mention that in the video, I should have.
APDTY 7 months ago
The ABS system requieres some adjust? Mi car gets the warning light ABS on after change the pads,all the sensors are conected, i dont know whats wrong, but the car brakes very well
CtlasCiera95 8 months ago
@CtlasCiera95 if the ABS light is coming on, that means there is a malfunction somewhere in the ABS system, you would have to have a scan tool that can communicate with the ABS system in the car to find out what the trouble code is. From there you can go and diagnose the system.
APDTY 8 months ago