Mini-Me SOHC VTEC
Loading...
Link to this comment:
Uploader Comments (BBiker14)
All Comments (32)
-
Heh, no problem
And yep, a cam will make it louder no matter how much ya adjust the valves
^^;
-
valves, sorry for the typo.
-
@vancecoledotcom My Vales are "loose" and will be readjusted tomorrow so they are abnormally loud right now, but i'd say my valve lash is on par with his in terms of sound when adjusted. I run a y7 block with a y8 head though and a cam so of course it will sound way dif ;)
-
He didn't say anything about any aftermarket cam in his car in the description
And my own mini-me sounded like that before I had the valves adjusted....so...yeah
-
Its called a Cam... And valve lash is normal on a Mini Me.. you should hear mine with my cam..
-
nut if u want vtec to work you need to remove oil jet between pistons.
-
@Hornybroham and p28 ecu
-
@eduardosantacruz 95 doesn't have vtec prewired. only 92's you have to pin the harness's and add the wires on the engine harness side and the ecu side.
-
can i stick a civic engine in my mk4 golf! :D
-
Valves sound just a TINY bit chattery, but other than that, this sounds sweet
:D
0:29
Mini-Me A6/Z6 with Y8 Manifoldby BBiker1417,853 views- 0:17
Sohc Vtec sound d16z6by 15kenj9,114 views
- 0:55
My Mini-Meby BBiker148,937 views
- 0:55
CRX magnaflow exaust (Test)by BBiker148,066 views
- 0:47
SOHC ZC Turbo...by Walterronny24,703 views
- 0:30
Wire tucked SOHCby ahudson0579155,760 views
- 0:49
D16 Civic Superchargedby epinero1271,468 views
- 0:16
Jdm D16 fully builtby jdmeg9dennis12,871 views
- 0:29
H22 Prelude vs D16y8 coupeby 5spd5thgen11,788 views
- 0:48
D15b7-z6 Mini-Me runningby ep3moschini23,815 views
- 0:15
mini-me swap not startingby martinman8011,994 views
- 2:25
d16z6 sohc vtecby Vtecmonster084,731 views
- 1:49
87.. mini me vtech.. walk thru....by mouse87855,746 views
- 0:37
Honda Civic Coupe 5gen 1,5 SOHC Vtec Dyno1by GDRadek8,183 views
- 0:09
My JDM D16 N/A SOHC Vtec revvin up sound clip(Modified)by krax7875,282 views
- 1:31
Honda Del Sol *MINI ME SWAP* LOUD VTEC!!by tec87824,824 views
- 1:07
11sec stock d16z6by b20king362,837 views
- 0:33
D16y7/z6 mini me swap eg hatchby JdizzleXD3,135 views
- 0:26
d15b7/y8 mini me in 88HFby Angryfuture43,628 views
hi i was woundering if u might be able to help me i have a project its a d15 block and was woundering if new if the d16 head will fit on there and i would still be able to use the original pistons that the stock d15 came with and also the d15 is a non vtec but want to convert it with the d16 head if u can get back to me as soon as u can that would be a great help thxs
supersport64 2 years ago
Yes, it will work fine. All D motors are compatible with each other.
BBiker14 2 years ago