Boss BCB-60 Pedal Board TU-2, GE-7, MT-2, BD-2, CE-5, DD-3 Ebay Demo

Ebay Item number: 300404163474 ending Mar 16, 2010 at 20:47:05 PDT

Category:

Music

Tags:

• Boss Pedal Board TU2
• GE 7
• MT 2
• BD 2
• CE 5
• DD 3 Ebay Demo

[fattirevsbud]

did you velcro the pedals to the board? would u recommend it?

thanx

[IplayMusic2]

@fattirevsbud These aren't velcro'd. These boards have lids so when they're moved the pedals don't flop around. I don't mind velcro, it's good. The drag is people put the velcro across the sticker on the bottom so if someone wants to take it off the sticker sometimes suffers. If you put velcro on the bottom of your pedals, only put it on the rubber part and make sure none gets on the label. You can trim the velcro easily. It works great. At least, that's my thought on it. Thanks for asking.

[DragiFlange]

Can I fit a wah pedal on that board?

[IplayMusic2]

@DragiFlange Yes. It's 8-1/2 inches from the inside wall to the wire trough. The cry baby wahs are 10" long. You would have to cut about 4 inches of the trough out to fit the wah through it, but it would fit pretty good then. Inside wall to inside wall going through the trough it's 12-1/2 inches. Thanks for asking, I hope that helps.

[Samyaza69]

@IplayMusic2 man you could play country music with those. get yourself a proper TC Electronic G-Force Guitar Multi Effects Processor

[hampurilainenXXL]

Imagine the signal loss.

[myskull54]

not bad for a metal zone, what amp are you plugged into?

[b0njov1]

i hear a Digitech Whammy pedal around 3:00.

[Hans0622]

Can this pedal board fit an electro-harmonix memory man or an ibanez tube screamer?

[Hans0622]

@23Vickery depends this one costs about 170 but you can buy them from anywhere to 70 to 500 bucks.

[23Vickery]

I'm new to pedals but how much does it take

to buy a pedalboard

[prsfrank]

@dannytayloruk its just Boss pedals , using Quality cable will help like George L will help, but wont fix it.The power supply will also draw something . Better to go with something like a Voodo lab Power 2.

Going direct into theBCB itself will just kill all the top end of the amp. Basically boss pedals are ok, but because they are not true by pass your signal is always going through their processor, then into your amp so everyone you daisy chain together will just suck tone away.

[dannytayloruk]

Just wondering why you have chosen to go direct into the pedal rather than using the input on the board and the same going from the last pedal straight to the amp is there any reason?