Chevy 406 idle clip

406, 5.7 rods, vortec bowtie large port 215cc heads, 66cc chambers, forged flat tops, 11 to 1 comp., isky solid roller, 272@.050 with .505 lift, corrected to .539 with 1.6 roller rockers, pro products hurricane intake, holley 750 double pumper, super comp 1 3/4 headers, full 3 inch exhaust with h-pipe and flowmasters. Currently has run a best of 7.17 @ 96mph 1/8 mile on 93 pump gas. Best standing 1/4 of 11.40 @ 118mph.

Category:

Autos & Vehicles

Tags:

• 406
• Chevy
• Camaro
• Drag
• racing

[metalworks73]

nice setup man

Hey you runin on pump gas? 91? 93? 11:1 with iron heads and 246* cam sounds like a risk of detonation. What elevation you at?

I have a similar setup going into a nova, 406 with scat rotating assembly with 6 inchers and forged flattops, Ill be using dart iron eagle platinums 215cc and 72cc chambers. CR should be around 10.3:1 Cam is comp XE284H (240/246*@50). But Im at 4600ft. makes me wonder if I should have gotten 64cc chambers

no knockin on your setup?

[bowtie1978]

I have no Idea what the elevation around here (Western Kentucky) is. I do run the car on 93 at about 34 to 36 degrees total, seems to work fine. Your 10 to 1 will work fine, better to be on the safe side with pump gas.

[nohaypamas]

i got the cam,a rpm air-gap intake,holley 750cfm doble pump, msd 7al-2 ign. box, 1.6 roller rockers, and im about to order a set of trick flow heads 195 cc runers 64 cc chambers, .600 max lift,do you have any suggestions on the heads? or you think thats a goo choice?

[bowtie1978]

What size engine? If it's a 350 those heads will work great, a 400 or 406 likes intake runners in the 200+ range. Sounds like a good combo, stay with a cam with duration in the 240 to 260 @ .050 range and about .550 lift. Should be close to that with your 1.6 rockers.

[nohaypamas]

fuck yeah!! you should check out my videos! im desperete to shear how my truck is going to sound like with that cam! what heads u got in your car?

[bowtie1978]

My engine combination is listed here under the ABOUT THIS VIDEO heading. Your truck looks nice, I had a v8 s10 myself, it went 11.80's with a 355 small block.

[sevangharib1984]

Nice job Bro.

[MEADOWSracing78]

what size wheels are on the back?

[nebdrummer]

badass man. sounds real good. do you crusie this at all? mileage? whats it pull for vacuum do ya know?

ive been debating on stepping up to a 200+cc head and a bigger cam, but i dont know how my drivability will work out. i cruise the crap outta mine, but i just wanna go a little faster. 12.80's-90's with 4000 lbs..

[glamisfanatic]

What kind of numbers are you putting down? I am building a 383 stroker for my 84 Z28, Ive got a forged scat crank, forged 6 inch scat rods, crane cam roller rockers, looking @ forged wiseco or probe pistons, custom grind LSM roller cam, either going with Dart or AFR heads, demon 750 carb. I am hoping to reach the 500hp mark. Its going to be a fun build :)

[BeboAltizer]

idk, it didn't make sense to me either when i re-read it. lol hard to tell what the hell i was trying to ask.

[glamisfanatic]

what kind of question is that. seriously

[256dallas]

very low idle nice cam pop

[nerazzurri1985]

the engine sounds to be supercharged... is it??

[matthewt2010]

I love the sound of the 406. Nice car man.

[HollowPointzz]

i want thoes rally's and thoes caps so bad