DIY HID Xenon Install: Mazda 3 2003-2009

http://www.xenonsupply.com/mazda-3-hid-xenon-package.html

How to Install HID Mazda 3
Do it Yourself Installation of HID Xenon Headlights on a 2006 Mazda 3. This installation will work on the following year models
2003, 2004, 2005, 2006, 2007, 2008, 2009

Direct Product Link:
http://www.xenonsupply.com/mazda-3-hid-xenon-package.html

Brought to you by XenonSupply.com

For the quickest response please submit questions to http://www.xenonsupply.com/contact.html

Category:

Autos & Vehicles

Tags:

• DIY
• HID
• Install
• Xenon
• HeadlightsMazda
• speed3
• 2003
• 2004
• 2005
• 2006
• 2007
• 2008
• 2009

[jimmybal10]

i have a mazda 3 2004 and i installed recenlty one of your product the cod is a h7 8000k and when i turn off my headlight my light flashes one side to the other (like a strboscope) can you help me guys please?!

[XenonSupply]

@jimmybal10 Please submit a support ticket via the contact page on the xenonsupply website. this is the fasted way to provide support.

thank you,

-XS Team

[damianfonseca]

The 2007 Mazda3 ESL is not at all the same as this 2006 Mazda3. You need to carefully loosen the bumber and rest it on a 6 inch height box, don't remove it the wires for the fog lights give you plenty of space. Locate the screw that secures the bumber where the tire is, it's hidden behind the plastic cover that surrounds the tire . If you pull the side of the bumber without having removed it, you'll tear the D ring that secures it and you'll need plaster after that to secure it from there on.

[XenonSupply]

@damianfonseca This video installation guide is only compatible with Halogen equipped Headlights. A Factory installed OEM HID Headlight housing is a different process

[UCBBears]

i assume Mazda 3 2011 is the same as the 2010...can you link me to the slim ballast product? I can't seem to find it on your site.

[XenonSupply]

@UCBBears Can you email us at Help(at)XenonSupply(dot)com? Youtube does not allow us to put links into the comments field. We will try to send you a private message with the requested information.

Thanks,

-XS Team

[ThePlantedtank]

@rowpnoyz2 No problem hope it helps if you have that issue.

[rowpnoyz2]

@ThePlantedtank thanks alot

[AstonDBS18]

21 people couldnt do the installation succesfully lol

[ThePlantedtank]

Positive is usually the non black color. Even it you connect it wrong, it should have reverse polarity protection. Negative is usually brown, black ect...

[rowpnoyz2]

hi i have 2011 mazda cx-7 i have two blue wire on my stock socket one with black stripe. which one is the positive? thanks..

[ThePlantedtank]

For all those who have flickering problems or so, it's because you need a H7 bulb adapter. In this tutorial he showed you using the rubber grommet. This may not stabilize the the bulb thus causing a flicker affect and improper beam patter. What you need is a actual H7 hard plastic spacer (adapter) to secure the bulb in place and cause no movement of the bulb. The adapter looks similar to the one that was attached to the bulb when he showed you the bulb. It's that black piece under the bulb.

[DominickChen]

This tutorial is awesome. I followed the steps and it works.

However, in nighttime the bulbs shine stably, but in daytime they flicker. Does that mean I need relay harness?? Mine is 2005 mazda3 by the way.