Classic Truck Powder Coating | UtahPowderCoatings.com

Powder Coating 2 classic truck bumpers in our Orem, UT based powder coating shop.

For longer coating life, we first sprayed the bumpers with a primer powder coating. That coating goes into the curing oven for a "partial cure" were the heat turns the primer's powder into a gel and when it cools, it becomes a hard, partially cured coating. The top powder coating - white, in this case - goes on after the primer.

The whole job then goes into the curing oven to heat the substrate (material being coated) to around 390F for about 12 minutes. While heated the second time, the primer can fully cure and the two coatings bond to each other in the final minutes of the curing cycle.

For more info on this Utah based company, visit http://www.utahpowdercoatings.com

For Frequently Asked Questions:
http://utahpowdercoatings.com/index.php?p=FAQ

Powder Coating Equipment List:

- Powder coat gun - ITW Gema Optiflex B

- Booth - Spray Systems

- Oven - Wisconsin Oven, Natural Gas

- Coating - TGIC Polyester

Category:

Autos & Vehicles

Tags:

• powder coating
• auto restoration
• bumpers
• utah
• powder
• coating
• bicycle
• brooker
• portland
• motorcycle
• chopper
• paint
• eastwood
• garage
• hotcoat
• my
• classic
• car
• dennis
• gage
• Metal
• Finishing
• Pilkington
• Paramed
• Systems
• Utah
• anodizing
• salt
• lake
• city
• Salt Lake City
• Truck
• Repair

[dashley15]

that was like watching wood warp!