Hobbyking - Phoenix 2000 review - Out of box
Uploader Comments (pix0rize)
All Comments (18)
-
@pix0rize Hi mate. Thanks for the reply. All four serv's were installed in the wings and it came with the pushrods too. There were two servo wires hanging out the plane and 4 from the wings so I needed a Y connector. I've put the flaps on chan 6 which is a switch on the TX. I'm hoping I have this right and they will slow my landings down a little. I'm ready to test it out now. Video shoud follow. Cheers. Gaz.
-
Have you tightened the nut behind the nose cone?
-
@pix0rize cool thats going on my ipod playlist...
-
@pix0rize as u can see Y wire is included with kit
-
@Cashngib ok ill try to record one and upload it. By the way you'll need some extra wiring stuff like extenders, Y wire too if you want, or spare wire and plugs to extend servo wires manually. Then you have to plug them to your RX to your Aileron chan using a Y wire or, like me, using two separate chanels (aux) and then programing mixes in your TX
-
@IbnAir23 Acoustic Project - The Hill Country
-
@pix0rize do a video showing how to conect the cables to the wings
Hi there. Great vid. I just purchased the Phoenix 2000 and my kit does not have the servo Y connector, but two servos are installed in each wing (4 in total). There are only two push rods in the kit so I'm guessing that I can only use flaps? Does anyone know. The instructions are not the best although the plane looks great. Thanks. Gaz
heliburg 1 month ago
@heliburg Mine came with 2 servos at wings (1 each), so i had to purchase 2 extra servos for flaps. BTW extra pushrods were included in my kit...
I connected them all to RX (6 in total) then i used mixes in TX to control them all.
pix0rize 1 month ago in playlist Uploaded videos
I like the music! What is it?
janschnewlin95 1 year ago
@janschnewlin95 Acoustic Project - The Hill Country
pix0rize 7 months ago