350z vs. Mach 1
Top Comments
All Comments (135)
-
Mach driver was terrible. My old Mach went 12.9 at 110mph with 4.10s and an ORX pipe.
-
@UnreadChapter i have a 350 with an intake a plenum and an injen exhaust and pulled a 370 by a car length so i wouldnt say its slow considering thats only about 35 hp gain however my car is 15k less
-
@Chadb89 VVTi uses coils to advance or retard the cams themselves which means if the coil that hold it in a certain spot at a certain time fails during operation catastrophic failure is likely also when you change to cams with a higher lift if you advance the same amount as a cam with the original lift then you would crash valve to piston but when it all comes down to it a few bolts are more dependable at high hp than a coil that is likely to slip
-
I walk Z's in my bolt on 07 and I know id get pulled by a bolt on mach come on driver
-
a 350z is slow... 370's stepped up
-
Kodarocks- is it 428hp or 450? I don't doubt you have it but I'm confused on your claims of rwhp? I'll check out your vidoes.
-
@Cowboy2792 z's are cool for sure but its really no contest. as i mentioned earlier a mach can hit 400bhp with full boltons pretty easily. z's are fun twisty cars though
-
@Storm7289 dude i agree with you 100%, both cars sound good though
they did the same thing with cobra ive seen them do 350-370rwhp
-
was that race near the high 5???
-
damn still lost to a slow garbage 350z
@tpersing88 no, actually you are a fucking dumbshit. machs came with 320hp it was underrated at 305, plus 320 tq. a simple midpipe swap and a few minor boltons saw 350+BHP easily. z's came with 304hp until the 370z which is 332 go read a fucking magazine before you come talking like you know things, mach driver did suck, a decent driver would obliterate that z gtfo fanboy
Storm7289 2 months ago 13
I had an 03 Mach with a stick, stock with the exception of a K&N FIPK and I smoked stock and worked 350Z all fucking day...the Mach driver sucked!
rubbinUright 2 months ago 3