HK 450 Video 8
Loading...
Loading...
11,002
Loading...
Link to this comment:
Share to:
Uploader Comments (tele1974)
see all
All Comments (7)
-
I hope your flying by now and know not to run an esc without the motor providing some type of load!!!
-
Just to note...When you say up & down elevator it is actually your 'for and aft' cyclic...Up and down is your left stick (trottle and pitch)...I have just completed my build, working on electronics now!!!
-
I also want to buy a HK-450 from Hobbycity but i'm confused because they have several HK-450 such as the TT pro, GT pro belt-drive, GT full Alloy etc...
If you know the difference between these helis please help me pick one!
-
Good, I found somebody else who's looking at all these parts and linkages and thinking... bugger...
-
You can use a 1.6mm drill bit for the 2mm screw.
i beleive this also equates to 1/16 inch
Loading...
- 7:08
HK450 Build 6 Final setup 1by rcalvarocr29,721 views
- 2:02
HK 450 Video 1by tele197412,212 views
- 5:25
HK 450GT PRO.AVIby newbflyer10129,254 views
- 0:56
HK 450 Video 5by tele19744,078 views
- 5:55
HK450 Build 2 Servo motor installby rcalvarocr35,781 views
- 0:38
HK 450 Video 3by tele19745,396 views
- 9:58
ESC speed controller setup and connectionsby ryeates344,691 views
- 0:42
HK 450 CRASH.AVIby paulombv6,403 views
- 5:38
HK 450 RC Helicopter 3d with a bonus CRASHby youtwoba132,654 views
- 3:37
HK450 Build 4 Tail boom installby rcalvarocr17,666 views
- 3:21
2009 06 28 HK 450 Metal Headby calvazable8,068 views
- 2:52
HK 450 V2 build reviewby unableelephant27,870 views
- 2:07
HK 450 test flight with hughes md 500 fuselageby tpowellgraphix20094,092 views
- 0:58
hk450 crashby notasixpack17,166 views
- 4:01
HK450 - First Outdoor Test Flightby ThePilotEleven18,750 views
- 0:49
HK-450 flybarless setup overviewby mmosca31,263 views
- 6:16
HK450 Build 6 Final setup 2by rcalvarocr15,288 views
- 2:45
HK 450 Turnigy 4000Kv-- Motor muito forteby reis157918,390 views
- 2:17
HK-450 in basic setup with complete metal upgrade parts and carbon bladesby pajlotmato223,275 views
- 1:27
EXI 450by tele19742,483 views
Thanks I didn't have clue when I was building this thing. Still don't.
tele1974 1 year ago