Bendpak XPR-10CX Lifting my Dodge diesel.
Loading...
Link to this comment:
Uploader Comments (dzlpwrd)
All Comments (10)
-
@dzlpwrd What other brands/models were you looking at ? I am between this and a Challenger E10, I lift mainly 3/4 and 1 ton diesel pickups.
-
When you have the truck on the lift it looks as if the front arms are deflecting down quite a bit, are they really or is it just a bad camera angle?
-
where did you get the distance from the front wall to the post? i have an Bendpak XPR-10ACX that i have had sitting the my garage since april because i jsut dont know how far back i should mount it. (have a four post also thats why i am not in a rush to mount it) i called bendpak and they wont really give me a way to determine that distance. i wonder if that is just a difference with the sym. versus the asym. versions?
-
Thanks for the video! I'm about a month away from purchasing this exact lift, so I have a few questions to ask you if you don't mind? First being, how thick is your concrete under the lift? Second, how far back did you place the lift from the wall? Is the final placement working out for you alright?
Thanks.
20:12
2 Post Auto Lift Installation Video - TP9KAC 9,000LB Capacityby naautoequipment4,351 views- 1:55
Unloading Your New Twin-Post Lift using a 2-Ton Engine Craneby americanautomotiveeq1,743 views
- 3:06
Under lift oil drainby dzlpwrd1,190 views
- 2:42
BendPak Company Perspective - Where we're going.by BendPakRanger4,936 views
- 8:38
BendPak HD9-XW buildby RGsedona18,179 views
- 2:56
The Atlas PV-10 - The Most Versatile Two Post Above Ground Liftby gregsmithequipment7,873 views
- 4:15
BendPakLiftby archersfriend3,926 views
- 0:59
Car Falls Off Lift!!!by Digitalme1984489,728 views
- 7:48
Versymmetric Advantageby challengerlifts12,361 views
- 1:57
Lotus Elise on BendPak HD-9by BendPakRanger30,761 views
- 3:28
WRECKED Car Lift Postby CanY0uHandleIt31,550 views
- 2:04
Unique South TV: Tesco of America & Challenger Liftsby Uniqueautosport4,880 views
- 1:37
Offset Adapters for BendPak Two Post Car Liftsby BendPakRanger1,182 views
- 5:38
Rotary SPOA30M Two Post Lift Demonstration (Part 1)by TRBullworthy5,941 views
- 0:38
TurboBlast Bead Seating System - Only On Ranger NextGen Tire Changersby BendPakRanger4,815 views
- 3:01
Awesome Garages - BendPak SP-7X In-Ground Car Liftby BendPakRanger10,126 views
- 3:46
The Ultimate Garage Liftby DannmarEquipment244,882 views
- 2:30
Bendpak R23ST low profile street bike install.wmvby RGsedona1,826 views
- 6:10
Rotary SPOA30M Two Post Lift Demonstration (Part 2)by TRBullworthy2,848 views
Im sure it does deflect some but I would say its more camera than anything. The tubing walls on the bendpak lifts arms are far superior to many of the lifts I looked into before I purchased one. Its a great lift and as long as you use common sense and balance your loads and use jacks it should be very safe.
dzlpwrd 1 year ago
It was in the installation manual I believe as 12ft 4 inches. I wish I would have come back at least another foot or so. But even my truck fits with a workbench in front of it. Its just a tight squeeze if you need to walk in front of it with the truck on the floor.
dzlpwrd 1 year ago
how high is your ceiling and can you stand upright under the dually?
schrankm 1 year ago
@schrankm Ceiling is 12ft 8 and i can stand under the dually comfortably and I a 6ft 1.
dzlpwrd 1 year ago
Not sure if you mentioned it, but how high is you ceiling?
Nice garage, btw!!!!
Johnny5liter 1 year ago
@Johnny5liter My ceiling is 12 ft 8 and the lift comes in at 12 ft1. Thanks I have been working on the garage for awhile to get it the way I want it. Not quite there yet but getting close.
dzlpwrd 1 year ago