6.0 LQ4 start up and rev

first start up since we have owned the motor.....

Category:

Autos & Vehicles

Tags:

• VID
• 00017
• 20100211
• 1739

[grantgtojudge]

we where wondering why it was idleing so high and we found that in the throttle body there is a plug that moves when current is put to it it was stuck wide open so when we replaced it it idled fine

[rodyisrael]

wiring diagram ?? where can i find it THANK YOU

[grantgtojudge]

@rodyisrael i dont have a wireing diagram we bought ours off the internet but if you go to LS1tech.com there is tons of info on diagrams if you want were we bought our harness from it is from techrods on ebay

[oakley6575]

Does an LS motor need a MAF sensor to idle like that?

[grantgtojudge]

@oakley6575 it doesnt need one to idle like that but it will run really rich and not idle so good so we just placed it on to make sure everything was opperating fine

[porfirio13]

cam year is the cam from

[grantgtojudge]

@porfirio13 2004

[blackkat7073]

I see a cool John Deer Tractor 6.0 video in your future. ;)

[levontracey]

what wire do you need to connect to the battery to get it to turn over

[rodyisrael]

@grantgtojudge thank you bro!!

[jkade72]

No maf with a speed density tune