Easystar Brushless Powertest
Loading...
Loading...
19,565
Loading...
Link to this comment:
Share to:
Uploader Comments (andrewwong1221)
see all
All Comments (2)
-
I would change the propellor to a slighty smaller one, since it seems quite big for a motor with 2400Kv Ö
But i dont know, its your airplne, and you know how hot the ESC becomes so you may deside ;)
Apart from that, it is just awesome to have a brushless easystar! :D
It makes it a whole new plane! :)
Loading...
- 10:02
FPV setup for an EasyStarby minneflyer21,433 views
- 9:35
Multiplex Easystar converted to DragonStarby youtwoba1,343 views
- 6:59
TwinStar - EasyStar BiPlane with 400W Brushless, with PEHAby richardmrazek11,144 views
- 5:10
Parkfun Fusion Tuningby Aviatorathome8,599 views
- 7:01
Multiplex Easy Star motor mount for a outrunner motorby Overnighterjg56,215 views
- 6:32
X-Day / Multiplex Mentor - Maiden Flightby pianoman21057620,436 views
- 4:38
Beginner RC Airplane!by RCSuperPowers442,641 views
- 5:40
EASYSTAR BRUSHLESSby paulkazjack25,427 views
- 5:26
EasyStar Before/Afterby guardianva812,741 views
- 3:41
multiplex easy star brushless set up(FIRST FLIGHT)by addsthetwin20,361 views
- 2:57
Multiplex EasyStar Brushlessby Streamer8531,019 views
- 5:44
Brushless Easystar in actionby Rowdyb6413,177 views
- 5:45
Parkmaster and Easystarby Jeroen1597533,253 views
- 3:25
Brushless easy starby fdaremi31,113 views
- 3:45
Turnigy 30FPS Ultra-Mini DigiCam TR800 TESTby wolw665,791 views
- 6:47
Multiplex Easystar FPV following rc airplanes easy starby hallstudio72,263 views
- 9:56
Easystar over Nümbrecht / Heddinghausen / Germanyby TheRealblueangel1,002 views
- 3:31
Multiplex EasyStar modified for aerial video and photographyby Free07Style43,529 views
- 6:59
RC Wing Dragon Brushless 3S Li-Po AP camby Stanman2421,881 views
- 4:10
Multiplex Easy Star Brushless + Digicam at Ratzeburger Seeby Abdreh7,319 views
How is your motor attached? And how do you like that setup?
MattEvans16 2 years ago
The motor is glued on to it's plastic mount with some goop (the screws don't line ip for some reason). Then I took a two inch length of pvc and covered it in tape till it fit the motor housing (you can use any container you have). I then glued a balsa stick into the pvc and glued the stick to the mount. So far, it's served me pretty well. It can climb at a 70 degree angle without problems, I'm using a 7x6 propeller.
andrewwong1221 2 years ago