800D Liquid Cooling Asus Crosshair IV Extreme

Specs:

Asus Crosshair IV Extreme
AMD Phenom II X4 965 C3 4.03Ghz
Asus HD5870 V2
Corsair 800D Full-Tower
Corsair HX750 Watts
Corsair Dominator GT 3x2gb (6gb) 2000MHz 8-9-8-24
NZXT Sentry 2 Fan Controller
Fans CoolerMaster R4-L2R-20CR-GP 90 CFM (not 69 CFM!) @ 2000RPM

Liquid Cooling System Specs:

Feser Tube Active UV Hose 1/2" ID (3/4" OD) Anti-Kink Tubing Black

Feser One Non-Conductive Cooling Flud 1000ml UV Red (is RED BLOOD-ISH)

Bitspower G 1/4" Thread 1/2" ID x 3/4" OD Compression Fitting- 7 Fittings

Bitspower G 1/4" Silver Shining Dual Rotary 45-Degree Compression Fitting CC5 - 1 Fitting

Danger Den G 1/4" High Flow Thread Barb - 1/2" ID - 2 Fittings at EK reservoir bay.

Danger Den DD-CPX Pro 12v 3 Pin Powered Pump - 237 GPH

EK Dual Bay SPIN Reservoir w/ Flow Meter - Plexi

EK CoolStream 360 XT Series Liquid Cooling Radiator

EK Supreme HF Universal CPU Liquid Cooling Block - Rev 2 - Full Copper - Nickel Plated

EK-FC5870 ASUS V2 Acetal + Nickel

These are available at frozencpu.com, ekwaterblocks.com/shop/, Amazon.com, and Newegg.com.

Song: Pastor Troy - I Want War

Add us at Steam: Redbulling & Khaotic420

More Info: http://www.xtremesystems.org/forums/showthread.php?t=265576

Category:

Science & Technology

Tags:

• Corsair
• 800D
• Liquid
• Cooling

[hokiturmix]

Exactly the way how this epic PC case should used. :D

[LJCH4E]

@hokiturmix thx but sadly i just moved to Intel from AMD :P you can check out my channel and you will see what i got.

[takimakikaki]

Do you have any problem installing the dual bay reservoir into the 800D?? It seems like the slider slats are obstructing in the 5,25 bays! Has the EK reservoir any slots of these to prevent to cut the slider stats out???

[LJCH4E]

@takimakikaki I have no problem with it. It's perfect fit. Yes, it does fits in DUAL 5.25" case bay. Very easy installation. Prevent to cut the slider stats out? Not really...but I saw paper instruction said If you bought extra impleres and you wish to change them, then simply unscrew all screws attached (with enclosed allen key) to acrylic top and replace impeler; to better block and fit flat in front case.

[LJCH4E]

@takimakikaki In otherhands, Fill reservoir through fill port hole so it will close your reservoir with plug and tighten it with enclosed allen key. Very easy to enclosed without leak. It's absoultely a hundred precent prevent no leak.

[EagleTalon423]

Your flow is wrong your spinner should be going clockwise. And to get the res in the case bend down the tabs behind the res.Other then that nice build.Im running an EVGA classified M/B 2 XSPC rads with a single SwiftechMPC 655 pump I7 processor and 2 GTX 260s V/C with EK water blocks. The Processor is on a XSPC waterblock and i have the acetal EX Spinpoint res.

[LJCH4E]

@EagleTalon423 i saw your videos very nice, btw. no it is going clockwise cause the pump is going to gpu first then second on cpu. spinner is way faster; if i addition two more graphic cards the spinner will be slow. And radiator is close to reservoir bay. I did checked computer turn off i can see spinner is going clockwise, btw.

[takimakikaki]

@LJCH4E Thank you sir!

[EagleTalon423]

WHEW ok cool. Just trying to help ya out if it was going the other way. Not trying to be know it all......lol

[EagleTalon423]

My typos sorry its a EK spinpoint Res and the rads are 2/360 XSPC rads .