MotionSound Pro145 Illuminated

Round two of illuminating my Pro-145. I initially got the idea on YouTube by another keyboardist (latchmo on YouTube, thank you) who had taken off the back and shined a light through the cabinet so you could see everything working inside. I thought it was cool and needed to do something about mine.

I decided it would really special to mount permenant lighting inside the cabinet. First I did the rotor section with red party lights. The clearance for the rotating horn was a bit hairy but it worked. I have a switch on the back to turn the lights off for a day gig.

Then after gigging like this a few times, people said I should light up the bottom half as well and, since I had red on top, I should use blue down below. Whatever.

The pressure was on so I decided to mount two sockets on the back hatch that, when in place, light up the drum going around in the bottom section.

I went with two twisty florescent blue lamps on the bottom. I tried to do the same with red on top but had to stay with incandescent because I was getting some 60 cycle hum on the amp with the twisty bulbs.

So, here it is....my punked out Pro-145 completely with red and blue lights.....

Category:

Music

Tags:

• pro145
• pro-145
• motionsound
• motion
• sound
• leslie
• rotating
• speaker
• hammond

[KeysBR]

Very cool!

[angie4josh]

spooky Leslie!

[latchmo]

Excellent !