Super Shear Foam Saw - Closed Cell Blade
Loading...
Loading...
2,625
Loading...
1:29
Super Shear Foam Saw - Open Cell Bladeby jleman853,897 views- 2:59
Closed Cell Spray Foam Insulationby dinotortorice1,402 views
- 0:42
Insulation - How to Cut P2000by P2thizzle767 views
- 4:06
Part 1 Open Cell Vs Closed Cell Foam Insulation Explainedby NOLAEnviroGreen21,981 views
- 2:37
Spray Foam Insulation - Open or closed cell?by Green3dHome25,679 views
- 0:24
BreVanas: Cutting Spray Foamby dusterduster42,104 views
- 3:31
SPRAY FOAM TOOLS WWW.THEINSULATIONSTATION.COMby Baxterman62275,940 views
- 2:04
Closed Cell Spray foam insulation applicationby unpicked129,785 views
- 4:36
Case Study 1 Open Cell Insulation Vs Closed Cell Insulationby NOLAEnviroGreen7,958 views
- 1:49
Spraying Closed Cell in Wallsby alpinerenovations1,267 views
- 1:16
Hot wire foam cutterby Xan2k42,631 views
- 1:03
closed cell foam mountsby soundmindaudio2,351 views
- 4:42
Foam Cutting: Hot Wire Bow Cutterby hwff6939,175 views
- 1:15
DIY upholstery foam sawby Designsbyg18,649 views
- 0:52
Closed cell application - spray foam insulationby CCMContracting410 views
- 1:30
Aminoplast Foam Injectionby isominc13,028 views
- 5:59
hopper gun1by davidboddie3,235 views
- 0:27
Closed Cell Foam Insulationby onealbuilders337 views
- 9:50
Open and Closed Cell Spray Foam Insulationby OneProjectCloser35,563 views
- 4:04
Cleexcut DRV400-500DAA - hot wire vertical cutting saw for polystyrene and foam insulating materialsby ROBEXDK2,111 views
@msjennybelly
I use this saw almost every day and it does not vibrate much at all if you use it correctly. You should only be cutting at about half throttle and keep a sharp blade on it and let the saw do the cutting.
keep in mind this is not a sawzall, it's a supershear. You haven't used one before and there is a learning curve.
*another tip is if you're cutting closed cell, scrape the studs first, other wise the blade gets pinched against the stud and makes it vibrate much more.
jleman85 7 months ago
This saw vibrates alot when using, wouldn't recommend it. I wish I would have never purchased it. Just wanted to help someone else out before they bought something, I'm still looking for the right tool myself.
msjennybelly 8 months ago