Ep. 20 - Bashar Free Energy Space-Time Antenna (Flux Gate Experiment)

I know from past experience that if you create a flux
in a coil, its characteristics change. This approach
is used in magnetic amplifiers and flux gate magnetometers, etc.
We have two interpenetrating coils in the Bashar STA.
Why not create a steady flux and see what occurs?
I've modified the Super Joule Thief circuit to utilize
a 2n3055 power transistor so that I can go higher with
current to the coil. A 1M ohm variable resistor, enters
the base of the feedback PNP to provide a way to tune on the
transistor's linear curve. The battery can be 1.5v
to 12v. I managed to dial in this interesting waveform
that has ringing in a "growing" amplitude each pulse?
Is that even possible? Going to a slower TIME/DIV on the scope
shows the radiant spikes within the STRATA of waveforms.
I've performed a RUN with 1.5v D cell for about 19 hours and battery voltage
dropped only 9/1000ths of a volt. LED at full brightness, 100% duty-cycle,
since its attached to DC-side of AC-DC germanium converter.
This is pretty cool.

Category:

Science & Technology

Tags:

• Bashar
• Free
• Energy
• Space-Time
• Antenna
• Flux
• Gate
• Tesla
• Moray
• Joule
• Thief
• Radiant

[JonathanSeagullUtube]

Nice to see you pulsing and variable resistant tuning! Have you used a toroid yet? Toroid works like a transformer (increases the voltage) maybe you use toroid, you'll get Tesla like effects !!! Have you tried with thicker gauge wire? (Regular household 110v gauge) PS You're one of my heros!

[morpher44]

@JonathanSeagullUtube

Well these videos were all about cone shapes per the Bashar information. There are lots of videos on toroids and Rodin coils, etc. I made a Rodin-like thing out of a Tuna can and have some videos on that. Yeah Toroids are also amazing. My sense of what can be done with Rodin coils is that unlike a transformer, you can PUSH the field OUT of the toroidal shape (rather than keeping it in for optimum transformer effect). So Rodin is all about connecting to that field.

[morpher44]

@JonathanSeagullUtube

This full scale Bashar coil used 14 Gauge -- which is house-hold gauge in the USA ... and a bit expensive at these lengths. I spent about $100 US dollars on the wire alone. Ya you could go to a larger gauge, at more cost.

[SolGuildOfAstronomy]

@morpher44 so u think at its potential in how big u make it, it can ppower a house?

[morpher44]

@SolGuildOfAstronomy

Remember this thing is an Antenna. The power needs to arrive to it from some other place? Yeah, a bigger one could power a house, if you had a 30Kwhr transmitter nearby.

[eSudburyDesign]

I've drawn up the blueprints of this coil prior to finding bashar simply under the understanding that this would hypothetically work. Understand the spiral, the vortex, phi and it's relation to perfect geometry and you'll find your answers. Goodluck

[eSudburyDesign]

If you wish to understand exactly how this works start researching vortex technology in relation to sacred geometry - you will see that it will all make sense from there - study the flower of life - it is the blueprint left for us - laser imprinted in the walls of an ancient temple thousands of years before ancient egypt. Everything you'll want to know is there.

[synespro]

do you know where i can get 3d models of the spiral cone inversion? I would like to 3D print it

[Disneyu]

any new developments?

[morpher44]

@cryzpin

See Ep. 13 for all the Bashar cone math.