Pulse Motor (Newman 03) 094

A Quick look into the Newman Pulse Motor and how it works.

I am trying to make the whole motor out of salvaged Parts.



Please Donate Now, so I Can Keep Making Quality Videos:

https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=9167141

Thanks for your support..

Category:

Howto & Style

Tags:

• Pulse
• Motor
• Magnets
• www.pulsemotor.co.uk
• Magnet
• Newman

[cedddd2001]

That's not the good way to build it

[kubikop]

Sorry, just showing the concept.

How is the best way??

Paul..

[joebro391]

what is sandwhiched, between the two magents?? looks like another coil, but it's hard to tell. thanks.  -Joe

[kubikop]

Its just Hot Glue, well its cold now........ ;-)

[Drevtoobe]

Hi there,

It is so cool seeing how you get creative and assemble disparate parts together into pulse motors.

Please don't take this the wrong way, but I get the sense that you are still on a learning curve for things to do with electronics.

If you are interested in some ideas for improving your measurements, check my postings on marthale7's channel.

Just search on "99 hours of testing NO VOLTAGE LOSS".

[kubikop]

I know that digital multimeter dont like being pulsed but if you use digital multimeters for the input and digital multimeters for the output wont the same flaws be inherent in the input that are in the output canceling each other out?

Ill have a look at the video postings.

Thanks Paul.

[mrtla69]

Put the Batteries in the magnet .Then place the unit in a Vacuum chamber. I think the Magnet field is disrupting the ions in the copper that's holding the charge. The magnet keeps the charge from dissipating back in to the space around us.This device Pulls the FREE Flowing energy from the space around it and bundles it all int the copper coils. But it needed a small taste of the Ions that it wanted to trap. A small gateway to the Power of Lighting, too much will cause i.

[cedddd2001]

The second self is synchronized to give a boost to the magnet to continu it motion for an other cycle at 90 and could also be reversed at 270 but one could be enough. The energy needed for this is a lot lower than the one produced since the motion got no hinder vector, but the air friction is a great resistance and so the device should be enclosed in a vaccuum. Do not use like a motor, don't put resistance onto the magnet axle wich is the heart of the system

[cedddd2001]

suite. at the same time neither. Then no energy could be induced at any time in the self because the magnet is like approaching and going away from the catcher all the time in the 360 degrees cycle. The only time we can get energy is when the magnet is on the same plan of the catcher angle 0 and 180 by electric switching it this short moment as they are actualy the highest north and highest south reversed potential. Open the remaining of time, the energy stocked in the catcher is not disturbed.

[cedddd2001]

It's not a motor it's an electric free energy generator. There must be a self wich is the energy catcher. The magnet must rotate inside this catcher exactly in the middle of the catcher lenght. It can be a free energy generator because the catcher can't produce the usual hinder vector, because the magnet try to induce energy with both its two magnetic fields at a time wich are this way anihilated by themself. If the vector would exist it could not act on the magnet motion on both end (same pole)

[ratheads]

Looks like ham and swiss cheeze......mmmmmmm, fooood.