Holley Carb Overflowing

This holley carb has been sitting up for 4 years........

Category:

Autos & Vehicles

Tags:

• Holley
• Carb
• Overflowing

[mac10guy]

you are one lucky mother fucker if that backfired out the carb you woulda been in the fukin burn ward

[stingraystud]

just put a bigger set of jets in it, i believe it is running way to lean, and it stalled at the end of the clip from fuel starvation, a high flow fuel pump would also help out =+]

[goteverything1]

She Looks fine to me..lol

[beboiscool41]

ctfuu @crazymalone

[68pishta68]

Hit that mofo's bowls with a plastic hammer, your needle's are sticking. I had a Demon that did that too, The O ring on the needle seat sheared whil installing and a little sliver held the needle off the seat.

[MasterChris117]

this was painful to watch

[689321546]

someone adjust the fuel levels

[CrazyMalone]

I think she's running a little rich...

[stangredemption]

@backwoodsctryboy: Leaks out the box? I had all three brands and neither had that problem so make up a new story on leaking out the box. Carbs a dying breed? I guess you havent checked the market lateley, THere are still millions of people who are converting to carb swaps because they dont wanna deal with 25yr old wires and $800 upgrades. Body's warping? Unless your timing is extreemly off making a shit ton of heat, that is not to blame on the brand, Now answer my question and lets see yours.

[stangredemption]

@backwoodsctryboy : Figures you would bitch about someone's stuf then get called out and wanna reverse the question but sure im down. a real "racer" in general dont bitch about what parts are worn and go with a different brand... They FIX or REBUILD. Not replace with another brand and think that's the solved problem Leak out of the box? ... Any one who races off the street on a track dont use power valves, Tuning? What's so hard about fine tuning? It's a easy as turning your idle screws.

[backwoodsctryboy]

@stangredemption exactly it, worn parts, inferior metals, power valves to blow, carb bodys warping, leaks fuel right out of the box, harder to tune......the above vid is not a top fuel dragster so dont even try to compare the two.......oh and what do u consider a (real) drag racer?? if u wana know the truth get rid of carbs and go mpfi.......carbs are a dying breed.

[stangredemption]

@backwoodsctryboy Please explain how Holley is junk? Do you see top fuel and even your everyday real drag racer using an edelbrock? Also just because it's overflowing dont make it junk... it's called worn parts and my edelbrock was trashed along with my Holley, fixed both. So again, please explain in detail to these viewers how Holley is junk...