Reloading Pt. 4
Loading...
Link to this comment:
Uploader Comments (jzorns)
Top Comments
-
GREAT video! You really explained everything well, I learned alot from these! Thanks jzorns!
2 years ago 3
-
Bullet seating depth for autoloading pistol rounds is usually decided by the maximum allowable length that will permit loading in the magazine. The round you're loading in this video (9mm) headspaces on the case mouth, not the bullet ogive's point of contact with the rifling; employing this method can create dangerously high chamber pressure. Taper crimping is recommended for autoloading pistol rounds to ensure reliability and safety.
3 years ago 2
All Comments (17)
-
@jzorns Are you kidding $200, I thought it would be 2 to 3x's more, so I have been holding off. I need to purchase my equipment.
-
ur rught dude thumbs up
-
Yeah thanks, I missed that all important decimal point in the old manual i was looking at. The decimal points are smaller as I get older. It's really not funny is it? 51 grains could be a fatal mistake?
- 8:13Lee Perfect Powder Measure part 1by daywalker62722,427 views
- 9:19reloading with poor boyby tcrow4913,228 views
- 6:02Jim Scoutten RCBS Single Stage Reloadingby MrSledgeHammerXXL62,761 views
- 2:24Reloading Rifle Ammunition part 2/4by wildernesseducation36,745 views
- 1:53Dillon 650 Reloading Basics part 1by mvpatriot38,615 views
- 0:15Horrific AK 47 Accidentby TedCrusty23,280,090 views
- 3:22Reloading Pt. 1by jzorns19,489 views
- 9:59Hand Loading for dummiesby Tapps4710,424 views
- 8:07An introduction to propellants -- Part 1by rldel1499,929 views
- 10:20Basic Reloading Equipmentby tharr200820,655 views
- 5:46The M6 Scout Survival Rifleby wildernessoutfitters274,212 views
- 0:53Reloading 9mmby JohnVH54128,748 views
- 0:31Basic Reloading 2009by MidwayUSA17,112 views
- 7:19RE-LOADING MY 22 HORNET... CHEAP & EASY!by weazle6627,964 views
- 5:59Reloading .223 5.56 on Dillon 550b 400 rounds a...by Free2Reload118,046 views
- 4:38Reloading .223 5.56 brass part 6-10by Free2Reload42,389 views
- 9:55An Entertaining Overview of the Hand Loading Pr...by rldel14937,138 views
- 10:03Basic Reloading-Part 4 FAQsby johnrob28139,852 views
- 9:50Dillon XL650 Loading 45 ACP (HD)by gavintoobe73,257 views
- 0:53Reloading demo - resizing and decappingby tpmimp50,440 views
Hey all: I just posted a new video that shows the whole process in one HD video. The new one is more efficient, as the priming and charging are done on the press. Two fewer steps, and even less equipment needed. These videos are not obsolete though, as they are more detailed. Enjoy. Remember to double check your charged cases for no charge or double charge before seating bullets!
jzorns 6 months ago
great vids...i have been tthinking about reloading for my xd 9mm and my m70 300 win mag..using lee equipment as well..so tomorow i just might have to go get some equipment so i can start reloading myself..i hear it is quite soothing...
abenewson 2 years ago
Yeah, it is a nice way to be involved in the shooting hobby without shooting. It takes enough time that it slows your shooting down a bit. You tend not to waste as much ammo on dumb stuff.
jzorns 2 years ago
how much was all the equipment
sylram8 2 years ago
Probably about $200.
jzorns 2 years ago
Nice videos, JZORNS. I bought a press a long time ago and have never got around to using it. At the time, a friend let me use his press to prime a few hundred rounds of .45 ACP. They are still sitting in my garage, now I am serious about reloading them. Anyone have a feel if primers have a shelf life? I think they should be fine, since they haven't been exposed to any extreme temperatures. But they have been sitting for about 12 years!
av8or46 3 years ago
It isn't time that you should worry about, but the moisture in the air soaking into the priming compound. I'd go ahead and use them, just don't count on them for personal defense. Have a bullet puller handy in case they don't work.
jzorns 2 years ago