Changing The Power Steering Filter & Fluid On A BMW
Loading...
82,159
Loading...
Uploader Comments (BavarianAuto)
see all
All Comments (54)
-
@machiavelli316bg yea its fine to do it that way just make sure you get the wheel fully locked to either side when you turn the wheel.
-
Thank you.
-
@BavarianAuto thanks for clarifying!
-
@W4TCH4W -
The filter is encased in the plastic reservoir and is not removable from the reservoir.
Loading...
I've seen people fill the reservoir, start the engine and turn the wheel from one side to other few times, than suck the fluid, refill, start again the engine and again move the wheel.
Is that a good way to do it or......? What do you think?
machiavelli316bg 1 month ago in playlist BMW repairs
@machiavelli316bg
Turning the wheel back and forth, may help to move the fluid through the system. It certainly can't hurt. Keep the engine running through the complete procedure.
BavarianAuto 1 month ago
Is this an automatic transmission? Do the manual have also a filter?
machiavelli316bg 1 month ago
@machiavelli316bg -
The type of transmission does not matter, All late model US BMWs have power steering. The fluid reservoirs and filter types may vary from model to model, but the transmission type does not matter.
BavarianAuto 1 month ago
@BavarianAuto the metal reservoir is the one in an angle right? False floor?
Thismexican1 1 month ago
@Thismexican1 -
I'm not sure what you mean about an angle. If the reservoir dues not have the screw-on plastic cap, with a dip-stick, as shown in the video ... it will be one of the various metal reservoirs. These reservoirs have the filter ring at the bottom of the unit, with a metal plate sitting on top of the filter. When you drain the fluid and look down into the reservoir, you see the plate. People commonly think this is the bottom (or floor) of the reservoir. Hence, "false floor".
BavarianAuto 1 month ago