Building a guitar ep05 - Bolting the neck
Loading...
Loading...
8:18
Building a guitar ep07 - Headstock Logoby marcoamf197717,476 views- 5:55
Building a guitar ep06 - String Treesby marcoamf19772,506 views
- 5:23
Building a guitar ep03 - Preparing the bodyby marcoamf19772,169 views
- 2:31
Guitar Neck Building-Five Piece Neck-Thru Guitar Part #1by markxkovacic12,162 views
- 2:43
Building a better guitarby ddbunker7,484 views
- 2:08
Drilling Neck Pocket Holesby ThroughTrueWoodwork1,478 views
- 3:57
The Differences Between Bolt On and Neck Thru by Chris Macsby smithgroove73,824 views
- 10:11
Building a Guitar ep17 Guitar Electronics part 2 Shieldingby marcoamf197711,172 views
- 6:13
Building a Guitar ep12 - Nut part 2-1by marcoamf19776,219 views
- 3:53
Building a Guitar ep15 Custom Pickguard part 2by marcoamf19775,932 views
- 9:09
Building a Guitar ep14 - Custom Pickguard part 1by marcoamf19778,190 views
- 1:49
My Clapton Guitar Creationby theclaptonfan1,053 views
- 9:09
Steve's Guitar Making - Part 2 - Neck session 1 of 4by bobloblaw170173,164 views
- 10:00
Build a Guitar, Part 1, Neckby buildaguitar99,837 views
- 1:05
Neck radius routing jigby Meulmeester176,069 views
- 2:23
From Scratch - Building an Electric Guitarby schinkel53,141 views
- 1:17
Dreaming up a guitar (used to be called "New Guitar Project")by jonnda10,168 views
- 4:43
Guitar Building - A Complete Custom Electric Guitar Buildby FloatingBones23,866 views
- 9:01
Lubing the saddles nut and string tree (John Cruz)by SanikKZ1,064 views
- 7:48
Custom Guitar buildby jakeprid28,963 views
Do you still don't have nutz???
LOL
Da hora seu projeto, to gostando de ver.. quero ver expecialmente a parte eletrica pq to montanto um baixo com uma captação parecida com essa que vc usou Humb + single coil.
UnclePastel 1 month ago in playlist Uploaded videos
@UnclePastel kkk, ficou muito legal a guit. A parte elétrica ficou bem versátil, com a gradação entre os dois captadores, volume, tom, split coil no humbucker para SC. Faz tempo que terminei, mas ainda não postei nenhum vídeo com ela.
marcoamf1977 1 month ago
Hi I am building a guitar and I am wondering what kind of bridge I should get. Also how deep should the pocket be in the guitar body be so that the neck fits at a level where the adjustments to the saddles can be made. I am thinking of buying a neck as I dont want to attempt to make that. does it matter the length of the neck. I have read that most are 25.5 inches. Thanks for your video. It will help me when I get to that stage.
ska757 3 years ago
I was inclined to get a hardtail strat bridge or Gibson, but since the body I bought had the big hole for a tremolo I decided to go with that. Solid block will give you nice sustain in this case.
The depth of neck pocket depends on thickness of the neck, but are mostly standard, and string height ends up being adjusted through the saddles. If wrong, you may correct depth using a shim.
Neck length will allow you to have more frets, but prob sounds different (I'll leave that to other users)
marcoamf1977 3 years ago
hey i bought a neck for the strat body which is only a tiny bit smaller than the pocket where u fit the neck but it is only a tiny pit smaller than the pocket hole is it still possible to fit it or wud i be better off buying another neck
lordofthestrings89ph 3 years ago
Hi, this neck I bought is also bit smaller than the pocket in the body - I'd say a bit less than 2mm. Np, if the neck follows about the same width as the string separation imposed by the bridge. Just check to which side of the pocket your neck needs to be attached (and which one will have a blank space), or if in the exact middle of the pocket.
If the problem is the opposite, you need to carve some space at the side of the neck pocket in the body - which is probably tricky.
marcoamf1977 3 years ago