300zx twin turbo-pulling the motor in 38sec
Loading...
Uploaded by nrdeadeye on Jan 13, 2008
Me and a buddy pulled the motor out of my 300zx, after it developed a horrible rod knock. It took just under 2hrs and we had no problems. Thanks TWINTURBO.NET
Uploader Comments (nrdeadeye)
Top Comments
-
I do it in less then 1 1/2hr cuz i pull it out with the tranny :)
All Comments (23)
-
@Foxy300ZX haha your wrong dude, i just pulled my 300zx motor last night with the tranny. all in once piece.
-
I dropped the exh, driveshaft, trans, cut the old wiring harness on this stock TT. What all else do i gotta disconnect before hitting the engine mounts?
-
my guy im tryin lift my 300zx n/a engine im just not sure were the mounts are located im just tryin make sure.... im doing it myself i already have the tt engine and trans on hold wit me i just started about a day ago i took off the trans just need help taking off the engine and lifting it
-
It comes out with the tranny, piece of cake I can do it by myself in around 3 hr's with out breakin a sweat in a cramped shop
-
@PPKLU bolt it to the intake manifold
-
how did you hook your engine to the hoist? chain around the motor?
-
if you knows the car and go through everything smoothly people can do it in 6 hours.
but it looks like these guys did it in 2, not sure how they did it o.0
-
it would oversteer
-
ok now put a hemi in and put turbos on it
2:22
300ZX motor pull part 2by Nissannx2000svg3,642 views- 1:34
motor pull pt 4 #2by Nissannx2000svg2,655 views
- 0:58
300zx engine problemby lsai0615,830 views
- 0:25
300zx engine before pull it outby RedlineWilo3,727 views
- 3:53
300zx looser babyby elvislawan79,057 views
- 0:25
Engine Knocking follow upby stevetravel141125,035 views
- 0:40
300ZX Twin Turbo: 12.2 at 116mphby Spartacus77790,490 views
- 0:34
90 Twin Turbo 300ZX Burnoutby 90ttZ118,120 views
- 0:46
300ZX Twin Turbo HKS BOVby JEZG8521,744 views
- 3:29
300zx motor pull part 1by Nissannx2000svg3,878 views
- 8:45
How to remove the upper intake plenum from a 90-96 nissan 300zx!!!!!!!!.mp4by kawininja9110,728 views
- 0:10
Don't EVER go to Harte Nissan - RIP OFF my 300ZX Twin Turboby deadgoon2030,907 views
- 4:53
300zx motor pull pt 3by Nissannx2000svg2,517 views
- 0:37
RIPP Tuned 300ZX Twin Turbo 383whpby RIPPMODS9,483 views
- 0:16
300zx meet ...!!!!!by Zoo8channel7,102 views
- 3:51
How to relocate the Knock sensor on a 300zx TTby JSpecFairladyZ22,786 views
- 2:26
300ZX Twin Turbo: 10.19@139mph (pilot: Randy Roth) - Speed Channel's Pass Time TV Showby seedyrom3430,166 views
- 0:39
300ZX Twin Turbo VTC Noiseby sillydillydokieo10,830 views
- 1:18
1994 300ZX Twin Turbo Engine Knock?by neoramen6,148 views
Do you have to remove the tranny to pull the engine. Im pulling mine in about a week to swap the turbos wiring harness test pipes and so on. the service manual shows if you connect the hoist right it tilts the engine back and the tranny comes straight up. Would it be easier if i dropped the trany though.
jaredjmoore89 3 years ago
It makes it much easier, and you cant lift the motor from the upper intake bolts with the transmission attached because it weighs too much. But if you have the Nissan bolt on lift points (which bolt onto the sides of the motor not the upper intake) it could be technically be done. But if you have the means to pull the transmission I would just go ahead and remove it.
nrdeadeye 3 years ago
it take me a week
STONECOLDSKULL1 3 years ago
The fact we had a lift and my buddy is a mechanic prob. helped a little, But a week isn't bad for driveway job.
nrdeadeye 3 years ago
Wheel is backwards
en5cer 3 years ago 4
Thank you wheel police...lol
nrdeadeye 3 years ago