CopterX 450SE V2 - Tick Tocks and Flips
Loading...
Loading...
12,969
Loading...
Uploader Comments (DavidSunshine867)
see all
All Comments (7)
-
haha, thx. SIMSIMSIM!
-
From hobbycity, they're the X-400 325mm CF blades.
-
where u get them from?
Loading...
5:11
CopterX flying figure 8by thedjgee3,714 views- 4:58
CopterX 450 SE V2 3D 14th flightby gishhot7,368 views
- 4:55
CopterX 450 SE V2 3D (8th flight)by gishhot16,916 views
- 3:34
copter x 450 test ericby ericperry30443,034 views
- 1:55
TAGS01 解説ビデオ 09 -- ジャイロの動作確認by JRPROPOTV2,562 views
- 7:37
First FPV Flight with a Joy Stick Controller April 11th 2010by FPVFLIGHTSCHOOL180,510 views
- 0:38
CopterX 450 SE v2 gyro 401 setupby bazathome200214,063 views
- 1:31
CopterX (T-Rex 450 Clone), rear mounted key chain cameraby forpointsex25,899 views
- 1:11
My CopterX 450 SE V2, Carbon Fiber Frame and Aluminum Head and Tail Upgrade.by BonewJunior12,289 views
- 7:52
Airwolfby stevo302363,923 views
- 4:42
CopterX 450AE V2 test basic 3Dby zew3025,308 views
- 2:41
Copterx 450 AE V2by thedjgee20,644 views
- 2:03
Preflight Checking for CopterX CX450 AE V2/ SE V2/ ME RTF Helicopter - Chapter 6by KyModelLtd16,537 views
- 9:39
CopterX 450 Pro first and second flight including start of crashby root7293,966 views
- 1:28
Phoenix Rc Helicopter Tutorial: Tick Tocksby jotaluz4,340 views
- 3:03
CopterX 450 tail servo setup work W1008by donphobos4,437 views
- 2:51
Dynam Erazor 450 Flyingby naipuay9,305 views
- 6:44
CopterX 450 SE V2 - first hoverby dudehdt2,301 views
- 1:09
CopterX 450 SE V2 - Testby bettmen15,996 views
- 2:03
CopterX CX 450AE V2 Helicopterby llochner5,897 views
What servos do you use to do this 3d ??
biribarj 2 months ago
@biribarj
The servos on the cyclic are HS65HB's.
The servo on the tail needs to be a digital servo, and I went with the Futaba 9254, but that's for 600 sized helis(It's a big servo, adds unnecessary weight), the Futaba 9257 is a good servo to put on the tail of a 450 tho.
The tail is important, there are some good gyro/digital servo combos out there for around $100, it's money well spent, if you want to have a tail that holds during 3D, you need to spend the money on the tail.
DavidSunshine867 2 months ago
wow!can you tell me your throtle curve,max. and min.pitch angle,and your swash mix percentage?
thanks!!!cause she is flying so hard and powerfull that i`m looking for some setup like that!
helikawpter 3 years ago
Sure, it's at 100% throughout, and about -13+13 deg pitch. Swash ARF, not sure, but the cyclic pitch isn't that extreme, only +/-6deg if you measure on the main blade, both for forward/backward cyclic.
You need carbon fiber blades to have a solid flight, I had the pro woodies on before this and it feels much more sluggish/sloppy in the air, you get sharp control with the carbon fiber blades.
Motor is a scorpion 2221-6 on an 11T, that's enough power not to bog. THe 430XL on 13T is good too.
DavidSunshine867 3 years ago
Oh ya, and the batteries are important for power, just as important as motor/ESC/blades. I was using the ZIPPY-K's, or Rhino's from hobbycity, they're only $32 and they seem way better than the EVO25's!
DavidSunshine867 3 years ago
Hey David!
Awesome flying!!
Sean and I just watched this and were super impressed!
Say hi to Lisa for me!
bluesun778 3 years ago
Haha, thanks!! Glad you enjoyed it, it's super fun to fly too! As fun as the mini one, times 100. haha.
Will do! Hope everything's going great for you!
DavidSunshine867 3 years ago