Chris's turbo 240z on the dyno
Uploader Comments (turbo280z)
All Comments (20)
-
is chris running stock engine internals?
-
Do you know what your compression ratio is? how built is your engine? forged or not? what turbo kit is it?
-
true dat the 30a is the same as the z32 internals
-
For the 84-89 300zx z31 tranny the weakest is the T-5 which was put in the 84-86 turbo models. The 30a 5spd which was in 4/87-89 turbo models including the 88 shiro, its the mack daddy tranny. The 84-89 n/a's were 71c's and our known to be stonger than the t-5's.
-
HAHA, a bunch! I just laid down an 11.8. Check out my vids for the pass. I am running a 4-spd
-
well the T5 really is not all that strong. I am putting in a 300zx turbo tranny, way bigger and stronger than the T5. Its going in with an adapter plate
-
I know that the T5 from the zx turbo is stronger than any nissan transmission. Looking at the T5s used for mustangs, do you think it can bolt up to the Z bellhousings? If so then this is a sure way to get that overdrive along with the added loading capacity.
-
its a built L28et you gotta see my other videos!!!
by far my favorite Z so far! wow. i'll trade you my 350z for it! haha
wrxftw 2 years ago
you should drive it!!! Thanks man.
turbo280z 2 years ago