First test of my DIY Jetkart - Jet Engine
Loading...
Loading...
6,522
Loading...
Link to this comment:
Share to:
Uploader Comments (nickthesafe)
see all
All Comments (2)
-
nice one nick, a inspiration to us all!! most jet engine gokarts started being built,after seeing you on scrap heap challenge,never thought that a diy gas turbine could be put to such good use...
regards jon
Loading...
- 2:41
FOR REAL SOUP CAN JET ENGINE TEST RUN!!!???????.....update 2by superfunnyman12343,068 views
- 2:14
Home built jet engine.by rainerfilm713,659 views
- 1:27
Nicks' DIY Afterburner Jet Kart - jet engineby nickthesafe167,771 views
- 1:18
Pulsejet turbo-propby nickthesafe92,214 views
- 1:32
Jet Kart !!!by tekkapiadmin3,738,907 views
- 2:47
jet engine test after flame tube modby jetturbine20059,569 views
- 1:03
Jet engine testby calgeneva2,586 views
- 9:37
DIY Jet engine gas turbineby jacebigelow8,838 views
- 2:58
Wren model Gas Turbine jet engine test runby combatwombat714,378 views
- 1:02
Catastrophic Jet Engine Failure In A Test Cell.by ATFSCrash1,743,467 views
- 5:47
TG-16 Gas Turbine Turbo Jet (ENG subs!)by LechuCzechu4,617 views
- 2:49
DIY Turbine motorcycle - V.Fast!by nickthesafe170,131 views
- 9:59
DIY Gas Jet Turbine Go Kart - Walk Talk & Start Upby smogthemog26,537 views
- 0:12
Jetkart compressor comes loose - jet engineby nickthesafe7,393 views
- 0:10
Dells Jet Kartby nickthesafe2,158 views
- 0:23
DIY Jet Turbine Go Kart Afterburner Run 2by smogthemog987,146 views
- 3:12
GR-7 Experimental Turbo Jet Engine Testby rcdon5,762 views
- 3:58
jet engine afterburner testby JOOLZNED16,339 views
- 2:41
Jet kart on the road againby berndsen198453,438 views
Why wouldn't the afterburner work on Scrap Heap Challenge.
It was sad that it failed in the end. Was it an oil pump failure?
NJPurling 3 years ago
nowhere near enough fuel flow!...it was a stinking hot day and without provision oil cooling we didn't have enough time between runs to let her cool down, the pump couldn't flow enough oil to get the pressure high enough - on run 2 it dropped to below 10psi with combustor pressure at P2 we were in the danger zone of gasses pushing back though the bearings, could've made a last run but bowed out to save an explosive deconstruction!
nickthesafe 3 years ago
sorry p2 was above 50psi..meant to say.
nickthesafe 3 years ago