300 WSM 1,400 yards (read desc.) .80 mile
Uploader Comments (diderr01)
All Comments (18)
-
@thuan123red I'm sorry,but if it's tips on building a rifle you need,then your asking the wrong person...I do not have an answer for ya.
-
очень хорошо заметно неправильное удержание.
подработка большим пальцем правой руки, во время выстрела.
-
The 300 wsm is quite capable at 1400 yards. The rifle seems to have some inconsistencies. Think you would have faired better with a 26 or 28" tube and a break. Pretty fast shooting though, nice.
-
@diderr01 10-4....Thanks for the load data my friend...I may have to try some of the info you provided but I'm going to have to play around with it a bit...I don't have the Norma cases or the Berger bullets. But I believe I can improvise.
-
Great shooting.. I have a 300wsm.. I shoot the 208amax. I have not tried the bergers. You have about 400 yards on me. Good video.
Is this the load you used?
200 GR. SFT SP Hodgdon H4831 .308" 2.790" 63.0 2678 56,000 PSI 66.5C 2802 63,700 PSI
MrNastytater 3 months ago
@MrNastytater
no.
Handload info:
Bullet: Berger 210 VLD
Case: Norma
Powder: 65.5 grains of H4831SC
Primer: Remington 9.5 M
COAL: 2.98
diderr01 3 months ago
@MrNastytater i was planning on building a remington 700 in 300 swm I was just wondering if i should get a muzzel break?
thuan123red 1 week ago
@thuan123red
It depends on how heavy of a barrel you decide on using. I thought about putting a Badger Ordinance FTE on mine, but the recoil is almost like a 308 as it is now. The draw back to a muzzle break is it can mess w/ harmonics and effect accuracy.
diderr01 1 week ago
You are running 2900 fps? What powder and primer configuration are you using, what length are you trimming your brass and what is your OAL? I handload for my short with a 200 gr accubond and I'm only getting 2712 with win brass, fed215 and imr 7828 at 67.5 gr of powder.
graykilla 1 year ago
@graykilla
Norma brass
I trim the brass to factory spec after 3-4 firings
2.98" coal "long lead, I have a long action" Bullet is touching lands
65.5 grns H4831sc
Remmy 9.5M primers
Out of a Shilen #7 @ 23.5" long 1-10"
diderr01 1 year ago