Reprap Project- slow is smooth, smooth is fast
Loading...
Loading...
631
views
Loading...
Uploader Comments (GeoDroidJohn)
see all
All Comments (4)
-
I don't have a 3D Printer,I wish. (no cash) But this made me think about setting I diddn't think about before, (if ever I can buy one). Speeds x and Y Hight Filliment size Plastic type Temparture Hot End type Hot Bed/No Hot Bed Software used Hardware used (belts bearings, motors, electonics, etc) ( A video about all the diffrent seetings could be good) Whoya ... sounds like it could be more difficult than I thought P.S. I linke your videos and Thanks for the Sub
-
Can add that to the old adage 'measure twice - cut once' :)
Loading...
7:56
Why I am starting to LOVE my 3D Printerby GeoDroidJohn8,648 views- 3:07
Reprap Project- White PLA kitsby GeoDroidJohn492 views
- 1:21
3D Printing of Hand-Crank Fanby vertigopolka151,747 views
- 1:25
Acetone and ABS solution + water = Dancing bubblesby peepzorz465 views
- 0:58
Reprap, printing faster and cleanerby stabadie17,144 views
- 3:10
Mendel Reprap testby cjedenmark193 views
- 1:17
GCode by Slic3r (RepRap)by demjp8RqDA766 views
- 10:42
Reprap Project- Broken Pulley, Remove and Replaceby GeoDroidJohn530 views
- 4:51
Reprap- Day 31 First Printby GeoDroidJohn13,244 views
- 0:42
Prusa Mendel RepRap printing at 60 mm/sby jhardy1rp5239 views
- 2:33
Android Bluetooth RepRap controllerby ThePipakin676 views
- 0:31
RepRap Prusa Mendel - First Printby ALSETIndustries417 views
- 6:41
Reprap Project- Prusa Ver2 Z-Motor Time Lapse FFWDby GeoDroidJohn1,164 views
- 5:26
Thing_A_Day_Part2_REPRAP_MASTER.wmvby RichRap2011310 views
- 1:19
RepRap Mendel making Mendelsby RepRapChannel37,771 views
- 1:30
My RepRap at HighSpeed (this is actually my third print!)by McNugget6750418 views
- 1:17
RepRap with Nylonby shockyhan1,026 views
- 0:57
Prusa Mendel Reprap at 138 mm/s with Klimentkip/caruKlipby caru831,604 views
- 0:45
R2C2 driving RepRap Mendel at his maximum speed 725mm/sby casainho408 views
- 2:06
1st print to compare .24mm and also spreading technologyby profounddevices603 views
I admire your work, I too started a Prusa, but taking a break from it. Have all the parts and electronics, and even some newer parts, but not happy with the hot end I got. Mine is much like yours, but you seem to have made yours work. Maybe you could do a video on yours and how you got it working for you.
Radcnc
Bob
Radcnc 3 months ago
@Radcnc Are you refering to making a video about the hotend? Could you upload a quik video of what issues your having a video is worth a 1000 words per frame.
GeoDroidJohn 3 months ago