Autococker Timing by Penguin's Cocker Tech Part 1
Loading...
Uploader Comments (Penguin545)
All Comments (35)
-
My cocking rod got screwed in too far and wont come out do you have any idea's to get it out PLEASE HELP
-
(as I have it) Timing is a thing of the past if you go E-Blade
-
where can i get an e trigger for an 04 prostock?
-
i have the same grips as you does it have a battery i bought it and i kno nothing bout it
-
very good vid 5/5
-
You rock... I have a '05 prostock with tons of probs and this video is helping. I'll surf you channel and see what more I can drag from the depths!
-
e2 mini orrey 4 sale msg me or shocker with a freak
-
I have a prostock pump and I was adjusting the back block and I would loosen it and the back of it wouldn't move. I would keep unscrewing it but i still couldn't a piece of paper between the block and body. Anyone know why? Thanks
-
make shure u didnt strip the little screw thing
-
I was ajusting the cocking rod and and it was going well until the little screw inside stop turning, now it doesn't work enymore....can you please tell me what I could do to fix it....THANK YOU
44:12
How to time an Autococker, take apart, tune, sweet spotting show of DEATH! 45 Minutes long!by paintballtechpb62,842 views- 9:19
Autococker Timing By Penguin's Cocker Tech Part 2by Penguin5459,150 views
- 4:16
WGP Karnivore E-Bladeby yodamann19,110 views
- 9:16
How To Properly Time An Autocockerby homycraz254,330 views
- 6:09
How To Time And Adjust The Velocity On An Autocockerby paintballster5,483 views
- 15:00
2009 Shocktech SFL Autococker Supergun Showby paintballtechpb26,538 views
- 14:52
WGP Autococker SR Reviewby paintballtechpb41,526 views
- 1:41
My sick autocockerby garbageman70513,871 views
- 15:40
Poppet Valve vs Spool Valve Paintball Gunsby paintballtechpb105,145 views
- 0:57
Pneu Cocker Hair Triggerby badger08887,858 views
- 0:49
How To Disasemble An Autocockerby MachinimaMonster3,898 views
- 0:34
Autococker in the tub.by bypassurgery9,972 views
- 0:33
WGP Autococker Trilogy Sportby freiermuthj13,506 views
- 0:59
How fast can a mech Autococker shoot?by qmto63,764 views
- 9:17
AutoCocker Timing - CockerTech.Netby cockertechjoe6,508 views
- 4:19
CCM Tech Video - How to set the Timing on a Chipley Pump Markerby tfccmtech4,884 views
- 1:59
Shooting the ANS GX5 Autocockerby mikeyusf19,170 views
- 1:27
HPB Asks: Will an Autococker with Autotrigger Destroy the Universe?by HawaiiPB8,916 views
- 0:43
2001 autococker - old schoolby PaintballerPat21,851 views
- 1:10
Tippmann Autococker 2by BlackcellIon33,795 views
how can you time a ccm autotrigger superstock?
PBboy08 2 years ago
Same as any cocker, ignore three way timing since it's a pump. Time the lug, back block, and cocking rod, couldn't be simpler.
Penguin545 2 years ago
what cocker is this, i have just bought one and don't know what it is called
soulsnatcher24 2 years ago
2005 Prostock (superstock if it has the electronic select fire (SF) frame)
Penguin545 2 years ago
Timing the hammer lug will make your pull shorter and lighter, and then timing the back block is a good idea so the air hole in the bolt lines up. Lastly do the cocking rod to lower the chance of misfeeds and chops.
Penguin545 3 years ago
the cocking rod head, i can get to twist maybe half a turn, how far up in the head does the cocking rod go?
jdwhelan 3 years ago
Depends on how far up it is already, you should be able to totally twist it off. If not work it with oil and loosen/tighten until the gunk in the threads clear out. Or pick up a good one for a couple bucks off ebay.
Penguin545 3 years ago