How to Mod. a Jet Tigers' Delta-wing flaps. Crazy Manuvers! Killer Speed!

Hey everyone. This the Maiden flight of the Jet-tiger with modified delta wing alerions flaps. The answer to getting your jet-tiger to do rediculous rollers etc.. Special thanks to Joe for this awsome video.. Hear the sound of my motor at 2:04min.

Category:

Science & Technology

Tags:

• HOW TO MODIFY
• RC JET
• JET TIGER
• RC LANDER
• RC LIGHTS
• 7 BLADES
• EDF UNIT
• 3500KV MOTOR
• 4-CELL LIPO
• 0.015mm LEXAN ALERION FLAPS

[crazy9catears]

well done guys....great flight...top mod to do...sounds wicked....

[CrazyEnergy2]

@crazy9catears thanks.. looking for your video of the Jet tiger.. eger to see what you got set up on yours.... let me know when you posted something up... 

[CrazyEnergy2]

@crazy9catears Hey.. how high do you think your glider went? No was so freaking high.. I think you got to use a 2.4ghz radio system and binoculars to see it up there next time.. Can't wait.. tell when you get that up..

[KnurglWurgl]

Hi,

my JeTiger looks somehow the same (the front section is glued much times :) )... The extensions seem to work good, thinking of doing something similar...

Can you please write what you have changed on the impeller, i am not so good in listening to spoken english. 70mm EDF? Whow ... Cells? ESC? Motor? Source, also Hobbyking?

And, you need a camera with a zoom the next time ...

What are the strings on left and white winf tip? Looks crazy...

Great job ...

Greetings

Knurglwurgl

[CrazyEnergy2]

@KnurglWurgl 0.015mm & 0.093mm Lexan sheets, HK2836 3800kv motor from hobbycity,com RC lander light system (B), Proton 40AMP Exceed-RC ESC (Nitroplanes,com), 7 Blades 64mm EDF unit from HK and 4-Cells 1300mah 30-40C (1600mah MAX though). I can't wait to see your mod. Enjoy

[CrazyEnergy2]

@KnurglWurgl it was a 5 blade fan unit... I put a 7 blade fan 64mm EDF unit in it. The strings are balloon strings that you would tie to a balloon. You can get these at a party store. Can you get a me a better camcorder? 4-Cells lipo battery. 30-40c, 1300mah capacity. Motor, Fan unit and can be found at hobbycity,com. Hope this help you.. enjoy.

[Michelle0173]

@CrazyEnergy2 You can do the same thing by just putting longer arms on the servos. Cost only a couple dollars, takes minutes to do and no added weight.

[Michelle0173]

You can do the same thing by just putting longer arms on the servos. Cost just a buck or two and only takes a couple of minutes to do and no added weight.

[crazy9catears]

@CrazyEnergy2 hi....i am using a 2.4ghz on my glider,i reckon i was getting close to 2000 ft ...will be on fpv next year,so above the clouds im going...

[KnurglWurgl]

@CrazyEnergy2:

The impeller in my JeTiger is from china, too. The original motor burned just after 5 flights ... The impeller has 5 blades and a 4500U/V-outrunner, performs good, brings 120km/h (measured with doppler-analysis). It is very cheap, get this including transport for 15 Euros (about 20 Dollars, i think)... It is from force control (Ebay).

Where have you placed lights? I think it will be funny to light the stripes that hang on the wing tips :)

[KnurglWurgl]

Great job, write down some info here, i (aqnd other people) may be not that good in listening to english ... :)

Will try some mods, too... My JeTiger looks the same, the nose is glued with much, much Instant-Glue ... :)

Greetings

Knurglwurgl