SL-Laser Truss Projection
Loading...
Loading...
3,238
Loading...
Uploader Comments (SLLaserSystems)
see all
All Comments (2)
-
Is the pulsing of the laser just due to the frame rate of the camera or does it pulse like that in real life? Either way this would make assembly so much easier :D
Loading...
1:14
MiTek Stabilizer Build-Offby MiTekInd2,388 views- 0:29
MiTek Plant Tour 3by TeamHeri11,625 views
- 3:23
Gerber Technology + Virtek TrussLine Videoby VirtekVision1,085 views
- 4:55
TCT Robotic Truss Assembly Systemby dzzoner3,720 views
- 1:06
Stabilizer Safety Videoby MiTekInd2,066 views
- 7:50
Long Span Trussesby WorkSafeBC84,484 views
- 1:08
SL-Laser on Anderson Routerby jgalek1,920 views
- 7:30
EideWizardPDS7minby EideIntegrated1,140 views
- 4:48
The Life of a Truss - Turkstra Trussesby TurkstraTV12,173 views
- 4:47
SL-Laser ProCollector (beta)by IvoPaimann1,455 views
- 3:57
New SL-5 Laserby snarebyte1,746 views
- 5:51
SL-Laser CNC Loopby jgalek2,722 views
- 3:22
Setting Trussesby kalyumet10,156 views
- 3:17
Loafing Shef with Lean-Toby etomiccompanies21,820 views
- 5:25
Truss Feasibility test/demonstration was conducted by Weyerhaeuser Research & Developmentby AZWorkerSafety2,861 views
- 1:43
SL-Laser Templatingby SLLaserSystems553 views
- 2:42
Laser Projector DMX testby MLTech287,205 views
- 2:54
Gerber Technology + Virtek: Composite Process Solutionsby GerberTechVideo1,095 views
- 2:27
Sarpanta industrializataby biancaflorina14,726 views
- 4:55
SL-Laser ProCollector - The Knight Theaterby SLLaserSystems839 views
The frame rate of the camera usually makes the flicker appear much worse in the video since it rarely syncs with the laser projector's refresh rate. The refresh rate of the laser is determined by the amount of geometry projected - it's infinitely variable. That's why we break a truss image up into setup, chords, webs and plates so that a builder can quickly select what they need to see and easily manage image flicker.
We cut setup times to a few minutes and give you precise plate placement.
SLLaserSystems 1 year ago