leepro1000
Loading...
Link to this comment:
Uploader Comments (timscott911)
Top Comments
-
I don't think your table is going to hold up too long.
3 years ago 6
-
is that a TV on in the background? What's the difference between the Lee pro 1000 and the lee loadmaster? did you ever have a lee turret press?
2 years ago 2
All Comments (21)
-
You need to mount that on a stronger table
-
9mm is too cheap to be reloaded. I reload for my 45 ACP and 38/357
Sorry for bad english
-
smart. I was using the auto prime with federal and blew up my auto prime.... about an hour ago. I am cut up pretty bad.
-
yes i have one for .40 it deprimes and resizes first auto index to second ware it seats primer and powder outo to third ware seatd and crimps then on the way back to first it sends bullet down a slide o and it inserts new brass ebay has these for less than 200 dollars for .40 all set up and redy to go
-
its in the first die deprimes and resizes
-
Devi fissare meglio la pressa pro 1000 al banco di lavoro ,vedrai che risparmi tempo e fatica
-
I want to know how does the lee pro 1000
de prime brass?
-
try what I did on my cheap 2x8 bench I did not just hang the reloader I cut through the edge so that it sits the reloader on the bench and I put 2 inch diameter hole right in the center of the 3 bolt hole so that the wasted primers will go directly to my thrash bin under the bench, it makes it more solid than just hanging it. I learn it from NASA they apperently using lee pro because its the cheapest / with the primer problem just make sure you dry clean the plastic slide to avoid sticking.
- 9:47Lee Loadmaster loading 45 ACP (HD)by gavintoobe92,648 views
- 6:01Lee Loadmaster Loading 9mm Luger (HD)by gavintoobe23,599 views
- 9:56Lee Loadmaster loading 38 special / 357 Magnum ...by gavintoobe17,801 views
- 0:36Lee Pro 1000 Bullet Feederby MrJohnalemany5,552 views
- 9:05Reloading Ammo (Lee Pro 1000 Progressive Press)by AlabamaGunHands9,331 views
- 2:28Loading 9mm on Dillon Precision XL650by MemphisMechanic62,644 views
- 8:17Lee Pro 1000 vs Classic Turretby tubular0316,964 views
- 2:45Dillon 550B - 9mm Lugerby gakido9935,616 views
- 1:38Lee Pro 1000 Bullet Feeder .40 S&Wby MrJohnalemany4,669 views
- 8:38Complete Cleaning of a Lee Pro 1000 Progressive...by sfliberal8,170 views
- 1:37Using the Lee Factory Crimp Dieby TexasStraightShooter24,226 views
- 1:08reloading 9 MM parabelum press LEE pro 1000 for...by nicolastbenoit27,658 views
- 2:35Reloading for the Nagant Revolver on the Lee Cl...by vonnieglen21,388 views
- 0:33Lee Pro 1000 Reloading Press (10 rounds)by ArcherAce2107,345 views
- 7:05Lee Loadmaster Loading .223 - 5.56 NATOby gavintoobe34,462 views
- 0:47Lee Pro 1000 Demoby LeePrecisionInc10,722 views
- 4:14Basic Reloading: Priming Issuesby ammosmith101,745 views
- 3:58Lee Factory Crimp Die.by ammosmith55,125 views
- 0:48Lee LoadMaster .223 Progressive Reloadingby Liberty4Ever88,180 views
if you polish your bullet chute with steel wool the bullets just fall right out, really smooth! really nice! did you pre-prime all of the casings? you're missing the priming tray.
jasonm621 3 years ago
I have since reinforced the bench with 2X4s and polished the chute with my dremmel, I use the LEE forbiden federal magnum pistol primers so I pre prime.
timscott911 3 years ago