Resetting ECU on Nissan Titan

This is how you reset the ECU on a Nissan Titan. It helps if your truck is in Limp mode and or if you have some trouble codes to clear.
1. Turn Key to On Position
2. After 3 Seconds pump gas 5 times
3. After 10 seconds hold gas pedal to the floor for 12 seconds
4. Release pedal for 10 seconds
5. Hold Gas on the floor for 10 seconds
6. Turn truck off, wait 10 seconds and start

Category:

Autos & Vehicles

Tags:

• Resetting
• ECU
• Nissan
• Titan
• Service
• Engine
• Light

[SILQ1616]

It took some tries but I think its because my timing was off.... but it WORKS.... THANKS MAN!!!!!!!

[MrGbo562]

whats limp mode?i have an issue with mine it turns off on me and revs real low and the service engine light is on

[appleyardscoutz]

Works well on 2003 350z, gotta get the first steps right.

[12344richard]

no codes if there's not any more issues  problems

[KuntryBoiVA]

would work for other codes? i.e. airbag light/code

[davidheng]

Hey thank u so much it work on my truck save me money

[MsTj2cool]

thanks so much, cost me $200 to turned it off. Much appreciated. I only wish I found it earlier before I get my smog checked. thanks again.

[95Jesusfreek]

@clightn027 Worked on My 2004 Quest too. Light came on after I had to take out the instrument cluster. Infamous fading odometer

[danielsalazarts]

thanks man, it works for my almera n16 2003, i think it work for all nissan

[jawuerte]

Worked on my 2011, 2007, and my old 2004 Titan! Just fyi