Pulpo Electrohidráulico/Motor Grab P-1,8

Pulpo Electrohidráulico/Orange Peel Motor Grab P-1,8

Pulpo accionado por un grupo electrohidráulico, compuesto de: motor eléctrico, bomba y valvulería hidráulica, que proporcionan aceite a presión a los brazos de trabajo (garras). Todo ello incorporado en el mismo cuerpo del pulpo. Colgado del gancho de cualquier medio de elevación, al pulpo electrohidráulico tan solo es necesario conectarle la corriente eléctrica mediante una manguera flexible proveniente de un enrrollador (no suministrado por nosotros).MANIPULACIÓN DE CHATARRAS MEDIAS, MEZCLADAS, CHATARRA 1-2 FRAGMENTADA Y RESIDUOS INDUSTRIALES MEDIOS, PAQUETES PEQUEÑOS DE CHATARRA... MATERIALES Y PRODUCTOS HASTA UNA DENSIDAD DE 1,8 t/m³

Electro-hydraulically operated orange peel grab composed by: electric engine, pump and electro-hydraulic valves which provide the pressure to the system and grabs arms (jaws) being all the elements assembled into the machines body. The grab will be suspended from any type of elevation equipment and it only needs to be connected to an electric point using a flexible hose which comes from a coiler (not supplied by us).FOR HANDLING MIXED SCRAP, BALED SCRAP WOOD IN LOGS, FRAG SCRAP,INDUSTRIAL REFUSE, MISCELLANEOUS SCRAP, SCRAP 1-2 PILED AND BULK MATERIAL DENSITY UP TO 1,8 t/m³

Category:

Science & Technology

Tags:

• Blug
• Credeblug
• Pulpo
• Electrohidraulico
• Orange
• Peel
• Motor
• Grab
• Azpeitia

[odmcarp]

@Shipguy2007 since it's brand new, they may have just finished the essembly, there might be air still in the lines, so they keep running it so the hydraulic fluid pushes the air out, and then they will all work in unison.

[Shipguy2007]

Are the arms supposed to close indepedently like that or is that a fault?