Engine noise
Loading...
Link to this comment:
Top Comments
All Comments (10)
-
ADJUST ROCKERS ... Feeler gauges ..
-
@bunjit1 Obviously you have NO clue. Yes, it is a pushrod engine and the cam IS driven by a timing chain. As for the noise, I would have to agree with bugeyev8. These engines are known to wear #3 cam lobe.
-
@mgguy78667 must be from the car next door then since this is a pushrod motor
-
Just hold it wide open and after a while the noise will stop...
-
sounds good normal
-
you need a new rocker shaft and rocker shaft bushings as well as having the rocker arm re faced, it could also be a flat camshaft on # 3 like so many have
-
actually that could be the normal sound of the tappets set to the correct clearences. If it starts sounding more like a lower pitched knocking then the clearences are set too wide, if the sound goes away then the clearenceces are set too close and that will rob you of horsepower.
-
sounds like timing chain slap
1:18
Valve noiseby JamesBlond200734,597 views- 0:03
engine noise help diagnoseby altimagician12,004 views
- 0:43
Engine Noiseby gobucks1030412,398 views
- 0:40
Weird engine noiseby vbevan18,048 views
- 0:44
Mgb driftby newquaylad66616,720 views
- 1:03
Engine ticking noise #1by kidsamston18,584 views
- 0:14
MGB Roadsterby xbartekx20,756 views
- 0:50
240d ENGINE NOISEby fgibbon18,458 views
- 0:20
Valve Train Noise Dodge 318by alexcrouse2,717 views
- 0:41
Honda Accord Engine Noise.AVIby Volvo745T10,008 views
- 1:32
Jeep Engine Noise 2.5 broken piston skirt #3, tick, knockby outlaw815924,612 views
- 0:30
300zx engine noise rattleby mkzg7,168 views
- 0:46
Oldtimer rally "Omiš 2007"by BarbaShime6,600 views
- 0:34
Engine knocking noiseby hpw196685,226 views
- 6:46
10 MG Valve Adjustmentby Universitymotorsltd65,224 views
- 0:43
Audi engine problems Ticking noise valve cover off 3by Fyrchiken24,125 views
- 2:03
honda crf450 engine noiseby 567460074,975 views
- 1:03
Valve noise or bearing?by msiaforum1,420 views
- 9:44
1967 Chrysler Newport First Start After Sitting For 20 Yearsby 73challey67newport36,062 views
No, sounds like an MG.
You will not get it better than this,
keep in mind that it's an MG.
hondacrdriver 4 years ago 3
adjust the valves to .015 thow . that might do something
SayerK 4 years ago 2