Bose Amplifier working in Infiniti G35 w/Pioneer Z110BT and Metra 70-7551

Some people seem to have problems getting the Bose amplifier to work properly when installing aftermarket radios, I have installed Pioneer decks in both a G35 sedan and G35 coupe and have not had this problem. Since all other wires are pretty much self-explanatory, I can only assume that people are not grounding everything the right way.

To do it the way I've done it, you connect the amp ground wire from the 70-7551, the ground wire from the 70-7551, and the ground wire from the factory harness together. Ground this to the body of the vehicle.

Category:

Autos & Vehicles

Tags:

• Infiniti G35
• G35
• Metra 70-7551
• Pioneer Z110BT
• Bose
• Z120BT
• X920BT

[dehart3a]

that merta harness kills the sound

[Wrathernaut]

@dehart3a The point of the video was to show that the harness didn't change the audio at all from before. The Bose amp is what kills the sound.

[Kidoelement]

hey so this means that i dont need to change anything else for it to work... and do u know if my stock nav will still work?

[Wrathernaut]

@Kidoelement The 05+'s work fine this way, but 03-04s seem to need a different adapter - PAC ROEM-NIS - to work properly.

If you want more help, come to the g35driver forums, I've got a fairly extensive post in the AV forums for what you need.

[mrlojix]

what dash kit is that?? how did you fit the nav unit?

[Wrathernaut]

@mrlojix You can see at about 0:41 that my first attempt to modify the 7W010 wasn't perfect, but nobody that I haven't pointed it out to has noticed, and I could do a much, much better job if I had to do it again.

[ninth504]

Thanks!!! Seems like you're the only person online with this info. I searched everywhere for an answer. This also solved my radio reception issues.

[mmotersykul]

Sir!!!!! Where do I plug the RCA's from the adapter into my deck? I have one set of RCA outputs (red and white) so would I need a splitter?!? Thanks!

[candynaw]

Where r u located i need help

[Wrathernaut]

@mrlojix Nissan Part 68260-7W010, fits perfectly with factory navigation units, but is hard to come by. The trim shown is Nissan Part number 68260-7W000. I cut the top 1/8" of plastic behind the aluminum off and folded the aluminum over, as I couldn't get the 7W010 in a timely manner.