Trying to dump PS3 NOR Spansion with Progskeet

Console: PS3 80GB CECHL
Board: VER-001

Progskeet: v1.1, with R8 (short) and R7 (short)

OS: Windows XP SP2

Installation: Kynar wire AWG 30, checked twice, with no shorts

Problem: Stuck at "Dumping Adress 0x0" on Winskeet

Category:

People & Blogs

Tags:

• PS3 downgrade
• Progskeet downgrade
• dumping 0x0
• NOR PS3

[85tometran]

Same problem here but with nor samsung, had shorten wires but problem is still there. Any solution Vit77 or any1 would be appreciated.

[vit77utube]

@85tometran Hey, I haven't tried anything else, because I don't have much time these days. In the end of the month I'll try to resolder it.

Have you tried eioman36 suggestion?

Good luck!

[SirGhas]

Any other solution for this problem ? I have exactly the same problem and the fix that gabcauseican mentioned did not work .

[vit77utube]

@SirGhas Nothing... I've ressoldered it all, with more short connections, tried new version of winskeet, tried in linux with yaskeet. Soldered more 3GND points, nothing...

It's not the problem with progskeet, I can assure you. Because a friend of mine tied soldering this progskeet in PS3 Slim, and it worked fine.

SirGhas, do you have the same model of mine PS3? What schematic did you use?

[nino7050]

Hy i will try to help you im not sure if it for this but try 2 things:

1)Instal in the PC the last NetFramework

2)Update Pc to SP3, i hope you win hem

[eioman36]

try in other pc, i was has the same problem

and.. was has more problems too.. (program ~ driver compatibility)

and when goes to erase, gets "verification failed" and brick the motherboard :(

i need to try to flash the nor with the r8 open, r7 closed, wp to 3.3, etc..

i haven't time to try, and have too e3 flasher (its more easy to use)

good luke :)

[vit77utube]

@gabcauseican I've tried it also, it's the same..

This week, I'll try another install, I'll film essential parts of install and winskeet/yaskeet and post it here. Maybe we'll solve this problem all together :)

Regards