How To Find Our Your Xbox 360's Error Codes
Top Comments
All Comments (86)
-
@American464 Bad DVD flash/ dead flash chip(Timeout)
Known fixes:
1) Check the DVD power and SATA cable for damages and replace them if necessary.
2) If you have soldered a modchip to the drive recently make sure it is sinstalled properly otherwise the flash chip isnt powered.
3) The flash chip must be desoldered and reflashed with an external programmer, recover the dvd-key if you can (unless you have a backup)...
-
@MrMrCario Dashboard update error (NAND related)
Known fixes:
1) Patch for the fall update(search on Google for it)/ Insert the NXE Update disc before the error screen pops up
2) Reflow the Southbridge
3) Southbridge X-Clamp Fix
4) If Software related, the JTAG Hack might work to fix it.
-
all codes are cause of overheating. the fans suck causing the whole board to warp fucking up contacts on it. then thermal paste needs reapplying. try towel trick. if it dont work, take it all apart for thermal paste application then towel trick again to resolder shit inside.
-
Thanks for this video
-
@MrMrCario did u turn off ur xbox on a dashboard update if so thats the problem.
-
What is 1013? Please respond
-
thanks, i figured out my code was 0110 and i adjusted the x clamps because they were apparently shorting the capacitors underneath, and got it working again :)
-
my xbox overheats in like 20minutes of playing games then gets the 3RROD. but when it gets 3rrod if i let it cool down for around 10minutes i turn it on the 3rrod is gone and its back to normal to green lights and i did do the xclamp and penny fix
-
help what is error code 80072741
-
help what is error code
Here is how you interpret the LEDs to get the code number: * All four lights flashing - 0 * One light flashing - 1 * Two Lights flashing - 2 * Three lights flashing - 3
Thumbs up!
PurePower999 1 year ago 15
@Chirs3451 its 0020 not 4424
ozomaky 1 year ago 4