Dynam E-Razor Maiden Flight & Problems / Crash
Loading...
Uploader Comments (earthling1984)
All Comments (59)
-
@erikatvdriver Hitec HS-65mgs are very nice servos. They are not the cheapest but they will actually work.
Futaba gyros are good. Gy-401.
ESCs I do not think you have to be very picky about. As long as it can handle the amps.
I am not very heli-wise, I am mostly a plane guy, but just as it is with planes, things don't work right when you go cheap. Especially with the electronics. If you can afford it you should just get a Trex 450, or even better, a 500. Better still, fly a plane
-
nitro planes is good. but xheli is bullshit/trash/worthless...i could on and on till im over 9 thousand years old
-
@RCvehicleGuy I know your directing that comment to earthling but im considering once i get my E-Razor 450, ill buy a T-Rex Gyro, better ESC, T-Rex Servos and maybe if it breaks buy a carbon Boom. The problem is, im not too sure which servo, gyro, etc. is best and right for this helicopter im getting. You think you can help me out with the electronics?
-
Thread locker!!!!!! check everything!!!!!!!!! I'v (almost) had this exact problem at least twice on different heli's, you should tell people this is why with any new or old heli check everything!!! give at least a few good tips with your videos!!!!!!! newbees tip> spend at least an hour or two checking everything.. find good build videos and watch a few of them also research your heli for known bugs/upgrades etc.on forums too!
-
Bad one way bearing. You should buy Trex 250 replacement parts for it, one ways, tail booms, blades, etc.
That might help if they fit on the thing.
-
@randomwebcamer As old as this comment is it still gets me worked up. If you have not got anything nice to say then don't say it. Also, there is no Blade 500, it does not exist. And Xheli does suck because I could afford what they have. :)
So just keep your mouth zipped if your just gonna bash people, it just not nice. Criticism is fine, but saying people suck is just not right. You suck.
-
i bought one razor 250 i dont knoe how to fly that shit still learing though,
1st flight tryin to hover dog was inspecting the heli an was too late he got to close an heli struck him, hes ok just got a lil cut
-
I have the same heli and i am having te same problems with it, but I got the exi 9g digital metal gear servo. I did not get any rubber grommets with so i can not attach it on my tail ??? so do you know how I can attach iton my tail?
-
Dude first thing when you get any thing from any of these China Company's STRIP IT DOWN! LOCK Tight is Your FRIEND!
-
sometimes vibration is caused by blades being to tight
7:02
Xheli SUCKS - E-Razor 250 Updateby earthling198411,024 views- 5:11
Xheli SUCKS! Where is my helicopter?!?by earthling19847,787 views
- 2:30
E-razor 250 fast flight in 20mph windby earthling19845,864 views
- 4:12
Walkera 4F200 Flight by a CUSTOMER!by earthling198429,247 views
- 7:44
Awesome Flybarless Dynam E-Razor 6ch Brushless 3D flight Videoby xhelicopter68,791 views
- 5:21
The New EXI 600 V2???by nuttcaze33,666 views
- 2:05
e-razor first real spin up reveals defectby paddystaxi1,228 views
- 1:21
Dynam E-Razor 450 Carbon Fibre First Flightby brentjdowney4,265 views
- 5:16
First crash of my E-Razor 450 CB editionby speedracerr150720001,726 views
- 0:54
E-Razor 250 accident.by 8sec2401,711 views
- 2:43
Dynam Erazor 450 Low Flying with Flip mino HD onboardby UnkleSi1,129 views
- 0:53
E-razor 450 with Bell 206 Jet Ranger Fuselageby sopress3,059 views
- 2:30
GY192 Gyro testingby globemc21,507 views
- 3:43
e-razor 250by lalakisx5,339 views
- 1:24
E-Razor 450 Frist Flight DX7 setupby vezoo5,215 views
- 4:48
Thrust SSC - Supersonic Land Speed Record Holderby PrivateCustard8,583,939 views
- 3:46
E-Razor 450by finstad082,920 views
- 0:53
New Exi 250 size 3-D Rc Helicopter In actionby xhelicopter89,232 views
- 4:00
E-razor 250 rx@tx settingsby helicoptermadness3111,265 views
Why don't you like Xheli, Nitroplanes,etc. I have many of their things, and they work great.
DistructiveRC 11 months ago
@DistructiveRC in my experience they have way poor quality and nowhere near as good hardware/electronics as other brands I have used. I've also had many ESC's burn up with stock setup/battery on their jets and planes.
earthling1984 10 months ago
How is the gy48v? Is it that much better?
globemc2 1 year ago
@globemc2 it seems to work pretty well for the type of gyro that it is.
earthling1984 1 year ago
your helicopter is broken because 1. You crash a lot and 2.You suck at flying. I have an e-razor 250 and it works just fine like my blade 500
randomwebcamer 1 year ago
@randomwebcamer there is no such thing as a blade 500... and I fly very well, check out my other videos. This helicopters gyro was crap(i swapped it out) and I also swapped out the blades, and the tail servo. It flies ok now, but I get constant vibration issues, the blades simply will not stay in track. It has a very flimsy plastic body that is very bendy and doesn't hold well. There are many *much* better choices than this heli!
earthling1984 1 year ago