DIY E-Cig. Great Vaping. e-cigarette.自动翻译字幕 Перевести авто подписи traduire légendes

Subtítulos buenos para la traducción automática
Legendas bom para tradução automática
自動翻訳のために良い字幕

Vape diectly from Charging Adapter : I needed a quick and dirty solution to a situation.

two, cheap, small e-cigarettes thats did not work, were easily turned within 30 minutes to a vaping tool, with 3000mAh Li-Ion cell and a L.E.D.
Overall it isn't too comfortable to use , especially the "switch" i used, but it did the job .
Of course this can be refined to a more user-friendly device. But I wouldn't invest money in this.

The crucial part is the OPPOSITE SCREW of those e-ciggs, otherwise you can't connect .

You must use a resistor to LIMIT VOLTAGE to 3.7V at most. to keep the atomizer safe.

* You still need Cartridges. but you can refill with syringe if that matters

LED Calc (-5%) : http://led.linear1.org/1led.wiz?VS=4;...

• Category

  Howto & Style

[Sheil Mavadia]

can you make a video on how to make a push button one, so you don't smoke into it at all. if you go on youtube and go this guy called: lutherdriggers

then go his video called 'DIY Micro Fog Machine From Green Smoke E-Cigarette Cartridge'

can you show me some thing similar as i need to make one for a project.

please can you help me out.

nice vid =D

[Ancient12Tree]

In the clip you mention, the guy explains about amperage and heat. Same here, you need a rather big switch / push button as the Ampis rather high = melt. What I did is quick and primitive : 2 copper plates. You can rig with thin rubber ring or buy 1 battery holder with a slide button which is less convinient, or buy an appropriately rated push button. Also you can add a (variable) resistor to adapt the current to the evaporator ( so it won't die quick) . Li-Ion starts at 4.2V , make it ~3.7.

[MrChief2091]

L E D, not "led" 

[Ancient12Tree]

Corrected . when you're right you write with your right hand

[Kyle Berg]

Thanks for the heads up bud. I don't usually mess with electronics but this looks doable.

[CowTownVapor]

hey you are awesome i feel so bad about you having to use those nasty prefilled cart's you rock you did fine dont listen to any negative comments most user post out of fear of what they dont understand

[Randall Davis]

come on Macgyver if your putting that amount of time building this thing, and you have a pretty good amount of electrical knowledge; by the way in this clip you do; try making something that looks decent, and not a thrown together piece of crap. these vid.'s on homemade crap are very dangerous for younger less experienced vapers!! your gunna have a lot of exploding batteries going on. NOT SMART!!

[KE5SUI]

It's not an acronym, It's an initialism (refers to an abbreviation formed from, and used simply as, a string of initials) and as such can be pronounced either way.

[bagdiil]

Children? Get off your high ass horse mofo. It's called L E D, the same as all acronyms they should be pronounced with the letters, NOT as a word in whole...

retard

[bagdiil]

If you don't understand his dialect the don't fkin listen. I'm from Sweden and I say that his English is good and that he has a comfortable voice to listen to. Now get the fuck away from this video if you can't handle it. Fkin troll

[xXCRAZYHACKSXx]

Learn how to speak English or make a video in your language and why don't you just buy one that doesn't need all that shit on it your Flickr. Stupid