Chronicles of h2opower # 7

Running at 77.5 degrees F using low power with the 8xa circuit. 3 capacitor WFC exciter array wired in series as per patent instructions.

Category:

Science & Technology

Tags:

• 8xa circuit
• hho
• Stanley A. Meyer
• free energy
• energy independence
• water for fuel
• hydrogen on demand

[zcsaba77]

Hi man

I watching your video, but cant hear clear, how much was voltage, and distance beetween tube/pipe. btw about inductor, can you say me parameters wire gauge, turns, inductance, and type of core? I want mine inductor upgrage to better, and need info from others, thanks

[h2opower]

@zcsaba77 The chokes are 2 Henrys using 24 gage bifilar wire 600 turns approx, the cores have an AL value of around 5000. The distance between the tubes 0.0288 inches. The voltage is around 145 volts. Remember this is working on distilled water with no added salts, bases, or acids using Meyer's old 8xa circuit.

Hope that helps you out some,

h2opower

[Grezski]

Are the tubes conditioned just like Ravi's? I see you would get the white coating after conditioning on the negative inner tubes if the tubes are wired in parallel.

[h2opower]

@Grezski Hi, no that is a myth started by someone who knew very little of Meyer's work. The tubes work a whole lot better if they are treated as real capacitors which have a very smooth almost polished surface for Meyer's work. That is something that is very different from Dr. Faraday's work from the 1860's. In these experiments I use nothing but distilled water with no added any to it. Each of the tubes & rods where polished on the surfaces facing each other.

[thewonn]

@h2opower

Have you experimented with conditioning the cells? Are you sure about that....conditioning made a huge difference in my overall production.

[h2opower]

@thewonn Yes, I've went through the conditioning process and with the way Meyer's technology works it doesn't have all that much of an effect as his end technology breaks down water by getting it to eject two or more electrons by way of ionization by building up a corona discharge in the water bath between the resonant cavities. That is the reason for all of the resistance added to the system so that a corona discharge can be made with the water being the medium.

[zcsaba77]

@h2opower thanks man, AL is aluminium?

[h2opower]

@AliveDog I will try to post but for me time is short so I will do the best I can. I post the science behind the technology on hereticalbuilders on the thread "Electric Fields and Moving Media, Stanley Meyer Explained" which the directly link can be found in my You Tube page.

I know about all the scams going on out there as most of them just give up and want some return on their messing around. Me I want my freedom and energy independence as that means far more to me than monetary gain.

[AliveDog]

A while ago I was looking into creating one of these in attempts of converting my car's power source to water. Due to lack of money, time, and, quite frankly, interest, I quit my experiments. If you do manage to make a car operate solely using water, please post the vid.

There have been many accounts of this phenomena, I'm not sure if they can be trusted, however.

Keep up the great work.

[h2opower]

@AliveDog Hi, I am currently building a new WFC exciter array that will have 12 capacitors wired in series which should be enough to run my car with the addition of the Gas Processor. The Gas Processor is something no one really ever talks about but it is the true heart of the system and I go over how it works on the hereticalbuilders site found in my You Tube page. This is all science but it is sort-of new which means a whole new set of questions had to be asked and answered.