The Phoenix 2000 was priced at $79.30 at the time this video was filmed. Please check HobbyKing.com for actual prices as they may be subject to change.
Link to this product:
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=13994
Link to HobbyKing online store:
http://www.hobbyking.com
More information on the Phoenix 2000 Glider:
This 2 meter wingspan glider takes 15 minutes to assemble and lasts a lifetime!
The wings and tail are made from tough EPO foam. However, the fuselage is made from a really strong blow moulded nylon skin with plywood formers, making it almost indestrucatable. Usually reserved for baby toys*.
The virtually indestrucatable fuselage is smooth and ridgid yet still light enough for the glider to perform.
Both the main wing and tail are screwed into place and the two wing halves have a carbon fiber rod for added strength.
The main wing includes 1 servo per aileron for strong control surface movement plus there is a pre-moulded slot so you can add your own flaps later.
All 4 9g servos, speed controller and brushless outrunner are included. Just add your own receiver and battery to be flight ready!
This really is a super strong glider that takes 15 minutes to put together and virtually indestructible.
Spec.
Wingspan: 2 meters (78.74inch)
Length: 1160mm
Flying Weight: 980g
Battery required: 1500mAh 3S
Motor: Brushless 2815/1050Kv
ESC Included: 30A
Required.
LiPoly 1300~1800mAh 3S
Receiver
Tx/Rx
check out my aerial videos using my phoenix 2000 epo glider and mini md80 camera.
Maximilionalpha 4 months ago
@Aerobaticsand3D1995 battery
Aerobaticsand3D1995 5 months ago
What "C" rating do you recommend for the 1800 3s?
Aerobaticsand3D1995 5 months ago
talk slower please
miffymichael8 6 months ago
I thought this was a glider? Oh well.
SilverCyclist 6 months ago
a great plane - we use this plane for our FPV flights
Greetings from TheBlindHawks FPV Team
TheBlindHawks 7 months ago
I intend to buy one in order to put a GoPro camera on it.
So, what do you suggest? To change the original motor for a stronger one? Which one would be?
Thanks in advance.
barrovirtual 7 months ago
@coolrick54 do u have a video?
rc18trocks 7 months ago
does anyone know how to rebind the tx and rx of this plane? its a lanyu transmitter. i had to repalce ESC because it burnt out in flight.. got a new ESC, but now the receiver flashes.. and i dontknow how to bind it.
coolrick54 8 months ago
@janschnewlin95 Just setup your ESC - it needs to have brake set to ON! I do not have this plane so can not give you more details, but generally it is done by ESC programming card or moving transmitter throttle stick defined way. Anyway you need to know how to do it and it is ESC vendor specific. Try to search HobbyKing in ESC, UBEC, VR > Programming Cards
dushino 10 months ago